Powermatic PJ1696 Jointer: Difference between revisions
From Artisans Asylum Wiki
(Created page with "Category:ToolsCategory:Wood Shop {{ToolBox |tool_title = Powermatic 16" Jointer |tool_subtitle = Jointer |image = Jointer_1696_in_action.png |caption = Jointing a board |make = Powermatic |model = PJ1696 |serial = Unknown |manufacturer_specs = |manual = [https://drive.google.com/file/d/1-zXhPNqbqg0oxevAsFApGALN0i8KbiS5/view?usp=drive_link Jointer User Man...") |
No edit summary |
||
| Line 20: | Line 20: | ||
'''This is a [[RED]] tool. Training and tool-testing are required.''' | '''This is a [[RED]] tool. Training and tool-testing are required.''' | ||
==Use For== | |||
Wooden boards only | |||
Length > 8 inches | |||
Width > 3/4" | |||
''Wood with uneven grain requires special care.'' | |||
==Do Not Use For== | |||
Fiberboard | |||
Plastics | |||
Composites | |||
Metals | |||
==Safety Notes== | |||
'''Personal:''' | |||
* Eye protection required | |||
* Hearing protection recommended | |||
* No loose clothing or jewelry, roll up sleeves above the elbows. | |||
* Tie up or cover long hair | |||
* Closed-toe shoes with good traction. | |||
'''Tool:''' | |||
* Make sure guards are in place and working well. | |||
* Switch on Dust Collector: Coral 2-filter between Jointer and Planer | |||
* Keep hands at least 3 inches away from the blades at all times. | |||
* Don't cut wood less than 8" long, 3/4" wide or 1/4" thick. | |||
* For wood less than 12" long, 3" wide and 3" thick, a hold-down or push block is required | |||
* Never apply pressure to stock directly above the cutter head. This can lead to the stock tipping into the cutter. | |||
* Wood grain must run in the direction of the cutting. | |||
* Never make cuts greater then 1/8" deep | |||
* Do NOT wear gloves | |||
Revision as of 11:59, 17 February 2024
| Powermatic 16" Jointer | |
|---|---|
| General Info | |
| Make | Powermatic |
| Model | PJ1696 |
| Serial | Unknown |
| Specs | |
| Manual | Jointer User Manual |
| Asylum Info | |
| Location | Wood Shop |
| Rubric | |
| Training | |
| Testing | |
| Restrictions | red |
This is a RED tool. Training and tool-testing are required.
Use For
Wooden boards only
Length > 8 inches
Width > 3/4"
Wood with uneven grain requires special care.
Do Not Use For
Fiberboard
Plastics
Composites
Metals
Safety Notes
Personal:
- Eye protection required
- Hearing protection recommended
- No loose clothing or jewelry, roll up sleeves above the elbows.
- Tie up or cover long hair
- Closed-toe shoes with good traction.
Tool:
- Make sure guards are in place and working well.
- Switch on Dust Collector: Coral 2-filter between Jointer and Planer
- Keep hands at least 3 inches away from the blades at all times.
- Don't cut wood less than 8" long, 3/4" wide or 1/4" thick.
- For wood less than 12" long, 3" wide and 3" thick, a hold-down or push block is required
- Never apply pressure to stock directly above the cutter head. This can lead to the stock tipping into the cutter.
- Wood grain must run in the direction of the cutting.
- Never make cuts greater then 1/8" deep
- Do NOT wear gloves
