Jet 36x12 Wood Lathe: Difference between revisions
From Artisans Asylum Wiki
No edit summary |
No edit summary |
||
| Line 30: | Line 30: | ||
* Hardwood rods and blocks, up to 8" diameter and 35" long. | * Hardwood rods and blocks, up to 8" diameter and 35" long. | ||
* Wood laminate | |||
* Some softwood, though detail isn't as fine | * Some softwood, though detail isn't as fine | ||
Revision as of 19:35, 24 February 2024
| Jet 36x12 Wood Lathe | |
|---|---|
| General Info | |
| Make | Jet |
| Model | JWL 1236 |
| Serial | Various |
| Specs | |
| Manual | Jet JWL1236 Manual |
| Asylum Info | |
| Location | Wood Shop |
| Rubric | |
| Training | |
| Testing | |
| Restrictions | red |
This is a RED tool. Training and tool-testing are required.
Description
A lathe is a machine tool that turns a round workpiece on a rotating spindle and allows the operator to cut it with a sharp tool. The workpiece is most usually a slender piece of hardwood. The cutting tool resembles a chisel, though it is specialized for lathe use. As the workpiece is turned on the spindle, the cutting tool is braced by hand on a stationary tool rest and applied to the moving surface.
Link to: Wood Turning Textbook
Use For
- Hardwood rods and blocks, up to 8" diameter and 35" long.
- Wood laminate
- Some softwood, though detail isn't as fine
- Straight-grained for spindle-turning
- Grain can be irregular for bowls
Do Not Use For
- Split or cracked wood
- Plastics or composites
- Metal
