Jet Horizontal Band Saw: Difference between revisions

From Artisans Asylum Wiki
No edit summary
No edit summary
Line 22: Line 22:
# Prevent drawn-in injuries. No loose clothing or gloves.
# Prevent drawn-in injuries. No loose clothing or gloves.
# Tool can overturn when saw frame lifted.
# Tool can overturn when saw frame lifted.
|}
{| class="wikitable"
!| Use For
!| Do Not Use For
|-
|
* Mild Steel
* Stainless Steel, Aluminum, Titanium, Brass, Bronze, Copper
|
* Hardened Steel
* Thin sheet/ plate
* Angle, Tube, or other stock that is too thin-walled to provide adequate blade engagement. '''Use the 3 TOOTH RULE'''
|}
|}

Revision as of 22:55, 16 November 2023


Jet Horizontal Band Saw
Jet Horizontal Band Saw
General Info
Make Jet
Model J-3130
Serial 414461
Specs Link to website
Manual Operating Manual
Asylum Info
Location Metal Shop
Rubric {{{rubric}}}
Training Sign up here
Testing Sign up here
Restrictions {{{restrictions}}}

Metal Shop

Safety First
Hazard Analysis
  1. Injury from blade snapping, or workpiece breakage. Eye Protection Required
  2. Injury from sharp blade.
  3. Cuts / scrapes from metal chips and sharp cut edges of workpiece.
  4. Prevent drawn-in injuries. No loose clothing or gloves.
  5. Tool can overturn when saw frame lifted.
Use For Do Not Use For
  • Mild Steel
  • Stainless Steel, Aluminum, Titanium, Brass, Bronze, Copper
  • Hardened Steel
  • Thin sheet/ plate
  • Angle, Tube, or other stock that is too thin-walled to provide adequate blade engagement. Use the 3 TOOTH RULE
Retrieved from "http://wiki.artisansasylum.com/index.php?title=Jet_Horizontal_Band_Saw&oldid=298"