Plasmatron Nozzle Assembly Instructions: Difference between revisions

From Artisans Asylum Wiki
No edit summary
Line 26: Line 26:




The part that effects the cutting action is called the '''nozzle.'''  There are four alternatives: one small format (called "Fine-Cut) and three in a larger format.  The thickness and material of the workpiece determines the choice of the nozzle, and machine settings are set according to the choice of nozzle.
The part that effects the cutting action is called the '''nozzle.'''  There are four alternatives: one small format (called "Fine-Cut) and three in a larger format.  The thickness and material of the workpiece determines the choice of the nozzle, and machine settings are set accordingly.

Revision as of 11:06, 26 August 2024


Link to: Plasma Shop main page

Oveview

The Torchmate CNC plasma cutter (also known as the Plasmatron) uses a Hypertherm PowerMax85 plasma torch as its cutting tool. The torch is carried on the robot gantry in a vertical orientation. The cutting tip consists of an assembly of five parts. It must be assembled by the user and if it isn't done correctly, the machine will fail to cut or it will cut poorly.

Instructions for how to pick the nozzle and the correct settings are located here

The Torch Parts

45A nozzle
45-Amp large format nozzle (copper)
Fine Cut nozzle
"Fine-Cut" small format nozzle (copper)


The part that effects the cutting action is called the nozzle. There are four alternatives: one small format (called "Fine-Cut) and three in a larger format. The thickness and material of the workpiece determines the choice of the nozzle, and machine settings are set accordingly.