Plasmatron Nozzle Assembly Instructions: Difference between revisions

From Artisans Asylum Wiki
Line 48: Line 48:
! colspan="2" class="infobox-image" | [[File:Plasmatron_torch_assy_cap.jpg|210px|Retaining cap]]
! colspan="2" class="infobox-image" | [[File:Plasmatron_torch_assy_cap.jpg|210px|Retaining cap]]
|-
|-
| colspan="2" |  The torch assembly retaining cap (plastic with copper threaded bushing.
| colspan="2" |  The torch assembly retaining cap (copper with plastic sheath)
|-
|-
|}
|}

Revision as of 12:36, 26 August 2024


Link to: Plasma Shop main page

Oveview

The Torchmate CNC plasma cutter (also known as the Plasmatron) uses a Hypertherm PowerMax85 plasma torch as its cutting tool. The torch is carried on the robot gantry in a vertical orientation. The cutting tip consists of an assembly of five parts. It must be assembled by the user and if it isn't done correctly, the machine will fail to cut or it will cut poorly.

Instructions for how to pick the nozzle and the correct speed and power settings are located here

The Torch Parts

Nozzles

45A nozzle
45-Amp large format nozzle (copper)
Fine Cut nozzle
"Fine-Cut" small format nozzle (copper)


The part that effects the cutting action is called the nozzle. They are made of copper. There are four alternatives: one small format (called "Fine-Cut) and three in a larger format. The thickness and material of the workpiece determines the choice of the nozzle, and machine settings are set accordingly.

The Fine Cut nozzles have hemispherical tips and they are shorter than the large-format nozzles. They can cut sheets between 0.024" (24-Ga) and 0.134" (10-Ga). These may be run at either 40 or 45-amp depending on the range of thickness.

The three large-format nozzles come in 45-Amp; 65-Amp; and 85-Amp sizes. They have conical tips and they are taller than the Fine-Cut nozzles.

Most often the 45-A nozzle is used. In carbon steel, it is appropriate for sheets 0.060" (16-Ga) up to 1/4-inch thick.

Retaining Cap

Nozzle into Cap
Inserting the nozzle into the retaining cap.
Retaining cap
The torch assembly retaining cap (copper with plastic sheath)