Burr King Belt Sander: Difference between revisions
From Artisans Asylum Wiki
No edit summary |
|||
| Line 37: | Line 37: | ||
== Safety Hazards == | == Safety Hazards == | ||
* '''ALWAYS WEAR EYE PROTECTION''' Face shield is recommended. | |||
* Do not use the machine if you haven't been properly trained. | |||
* ALWAYS turn on the '''Dust Collector''' before operating the machine. | |||
* Keep fingers and hands away from the moving belt. | |||
* When possible, grip the workpiece with vise grips to protect the hands from abrasion and excessive heat. | |||
* Do not wear gloves. Fabric gloves can be sucked into the machine by the moving belt, causing serious hand injury. | |||
* Beware of sparks showering from the machine during grinding. | |||
* Do not allow piles of metal powder to accumulate inside the machine. Sparks can cause them to ignite. | |||
Revision as of 14:42, 12 October 2024
Link to: Metal Shop main page
Link to: Metal Shop tool list
| 2x48-Inch Three-Wheel Belt Sander | |
|---|---|
| General Info | |
| Make | Burr King |
| Model | 482 |
| Serial | Unknown |
| Specs | n/a |
| Manual | Burr King 482 Manual |
| Asylum Info | |
| Location | Metal Shop |
| Rubric | n/a |
| Training | Metal Shop 101 |
| Testing | Tool testing, or come to the shop on Tool Testing Night |
| Restrictions | red |
 |
 |
Eye protection required! |
|---|---|---|
Description
This free-standing sanding machine drives a 2-inch wide abrasive belt vertically down behind a small table that supports the workpiece. A vertical backing plate presses back against the pressure on the workpiece. The machine has a variable-speed control and a dust collector. Its three-wheel architecture makes it easier to control the belt tension.
Use for:
Hard and soft metals
Some plastics
Do not use for:
Toxic materials
Safety Hazards
- ALWAYS WEAR EYE PROTECTION Face shield is recommended.
- Do not use the machine if you haven't been properly trained.
- ALWAYS turn on the Dust Collector before operating the machine.
- Keep fingers and hands away from the moving belt.
- When possible, grip the workpiece with vise grips to protect the hands from abrasion and excessive heat.
- Do not wear gloves. Fabric gloves can be sucked into the machine by the moving belt, causing serious hand injury.
- Beware of sparks showering from the machine during grinding.
- Do not allow piles of metal powder to accumulate inside the machine. Sparks can cause them to ignite.
