Wilton Horizontal Band Saw
From Artisans Asylum Wiki
| Wilton Horizontal Band Saw | |
|---|---|
| General Info | |
| Make | Wilton |
| Model | 3410 |
| Serial | Unknown |
| Specs | N/A |
| Manual | Operating Manual |
| Asylum Info | |
| Location | Metal Shop |
| Rubric | N/A |
| Training | Tool classes |
| Testing | Tool testing |
| Restrictions | red |
Use For
- Mild Steel, Stainless steel, Aluminum, Titanium, Brass, Bronze, Copper.
- Per sign on machine, only cut material thicker than .166” (Max for blade size in use. Use 3 tooth rule.)
Do Not Use For
- Hardened steel
- Thin sheet/ plate
- Angle, Tube, or other stock that is too thin-walled to provide adequate blade engagement. Follow sign on machine and
- Use 3 TOOTH RULE
