Drill Press Rikon Radial 30-250

Rikon Drill Press
File:Wood shop drill press rikon.png The Rikon radial drill press
General Info
Make	Rikon
Model	30-250
Serial	Unknown
Specs
Manual	Rikon 30-250 manual
Asylum Info
Location	Wood Shop
Rubric
Training
Testing
Restrictions	red

See the Drill Presses category for notes on using all Drill Presses

This is a "radial" drill press.

This machine is held together by a set of cylindrical clamps on various posts that form the machine structure.

This property allows the user to tilt and reposition the drill press head and the table, if desired.

Please refer to the Rikon 30-250 manual for more detail on how to make these adjustments.

To change the spindle speed

1. Unplug the machine.

2. Open the belt cover.

3. Loosen the belt tension lock (A) and pull forward on the motor (B).

4. Choose the desired speed from the chart on the inside of the cover.

5. Shift the belt on the pulleys to the desired configuration.

6. Push back on the motor to tension the belt.

7. Tighten the belt tension handle.

Changing the spindle speed on the Rikon drill press.