Eastwood Powder Gun
| Eastwood Dual-Voltage Gun | |
|---|---|
| General Info | |
| Make | Eastwood Hotcoat |
| Model | PCS-250 |
| Serial | |
| Specs | |
| Manual | Manual |
| Asylum Info | |
| Location | Metal Shop |
| Rubric | |
| Training | Tool classes |
| Testing | Tool testing, or [[:Category:Metal Shop#Tool Testing
Night|come to the shop on Tool Testing Night]] |
| Restrictions | red |
 |
 |
Eye protection required! |
|---|---|---|
Description
| |
|---|---|
The Eastwood gun is the most compact powder-coating tool in the shop. It has a fully-enclosed high-voltage power supply a cable that stretches to the gun, the gun itself, a grounding wire that attaches to the workpiece or the rack that holds it, and an activation switch for the high voltage. Standard jars of powder-coating paint screw onto the gun for easy color change, though the gun must be cleaned after using a particular color.
| |
|---|---|
This tool has a "dual-voltage" feature, allowing the user to switch from 15kV to 25kV depending on the need. The lower setting is used for most applications, especially when spraying the interiors of hollow parts. The higher setting is used when adding a second coat of paint to a part.
| |
|---|---|
There is no ON/OFF switch for the power supply. The unit should be unplugged at the wall at the end of each use. The high voltage is inactive until the gray activation switch is depressed.
Safety
Link to: Safety notes for Powder Coating
| |
|---|---|
| The Eastwood dual-voltage power supply |
