PowerMax 30XP Handheld Plasma Cutter
Link to: Metal Shop main page
Link to: Metal Shop tool list
| Handheld Plasma Cutter | |
|---|---|
| General Info | |
| Make | Hypertherm |
| Model | PowerMax 30XP |
| Serial | {{{serial}}} |
| Specs | n/a |
| Manual | PowerMax 30XP Manual |
| Asylum Info | |
| Location | Metal Shop |
| Rubric | n/a |
| Training | |
| Testing | |
| Restrictions | red |
Description
Similar to an arc welder, a strong electric current is passed between an electrode and the workpiece. A conductive plasma forms in the gap between the two electrodes, reaching a temperature around 15,000 Kelvin (~25,000° F)
In a plasma cutter the arc is combined with a jet of air. The air jet clears molten metal from the workpiece, allowing the machine to make deep cuts in metal sheets. In some metals, especially steel, the air also contributes heat by oxidizing the metal under the arc.
Use For:
Cutting, piercing, or gouging metals
Mild or Hard steel
Stainless steel
Copper and alloys
Aluminum
Titanium
Cutting thickness up to 5/8 inch (16mm)
Piercing thickness up to 1/4 inch (6mm)
Do Not Use For:
Toxic metals (Lead, Zinc, etc)
Galvanized steel
Non-metals
Flammable materials
Safety Notes
- Plasma radiation and UV can damage eyesight. Shade 5 eye protection or darker required.
• Wear welding gloves, face protection, cotton clothing (no synthetics) and closed toe shoes.
• Ear protection recommended.
• Toxic fumes may be emitted, especially from chromium-containing alloys such as stainless steel and tool steels. Wear a respirator in those cases.
• Arc ignites immediately when torch trigger is pushed.
- It cuts quickly through gloves and skin. - Keep hands, clothes, and objects away from the torch tip. - Keep hands clear of the cutting path. - Never hold the workpiece. - Never point the torch toward yourself or others.
