Abrasive Blade Metal Chop Saw
From Artisans Asylum Wiki
Abrasive Blade Chop Saw | |
---|---|
General Info | |
Make | Dewalt |
Model | D28710 |
Serial | Unknown |
Specs | |
Manual | |
Asylum Info | |
Location | Metal Shop |
Rubric | |
Training | Tool classes |
Testing | Tool testing, or [[:Category:Metal Shop#Tool Testing
Night|come to the shop on Tool Testing Night]] |
Restrictions | red |
Metal Shop
Use for:
- Hardened Steel
- Mild Steel
Do Not Use for:
•Aluminum
- Copper
- Brass,Bronze
Soft metals will gum up the abrasive cutting disk.
- Zinc (or anything galvanized).
- Titanium
Hazard Analysis
- Tool is very loud. Hearing protection required.
- Flying pieces from broken abrasive discs/ blades. Eye protection required.
- Prevent drawn-in injuries. No loose clothing or gloves.
- Cuts/ scrapes from sharp cut edges of work•Burns from hot work pieces
- Breathing particulates thrown into the air. Respiratory protection recommended.
Operation Notes
Eye protection required! | ||
---|---|---|
Chop Saw clamping tips |