PowerMax 30XP Handheld Plasma Cutter
Link to: Metal Shop main page
Link to: Metal Shop tool list
 |
 |
Eye protection required! |
|---|---|---|
| Handheld Plasma Cutter | |
|---|---|
| General Info | |
| Make | Hypertherm |
| Model | PowerMax 30XP |
| Serial | {{{serial}}} |
| Specs | n/a |
| Manual | PowerMax 30XP Manual |
| Asylum Info | |
| Location | Metal Shop |
| Rubric | n/a |
| Training | |
| Testing | |
| Restrictions | red |
Description
Similar to an arc welder, a strong electric current is passed between an electrode and the workpiece. A conductive plasma forms in the gap between the two electrodes, reaching a temperature around 15,000 Kelvin (~25,000° F)
In a plasma cutter the arc is combined with a jet of air. The air jet clears molten metal from the workpiece, allowing the machine to make deep cuts in metal sheets. In some metals, especially steel, the air also contributes heat by oxidizing the metal under the arc.
Use For:
Cutting, piercing, or gouging metals
Mild or Hard steel
Stainless steel
Copper and alloys
Aluminum
Titanium
Cutting thickness up to 5/8 inch (16mm)
Piercing thickness up to 1/4 inch (6mm)
Do Not Use For:
Toxic metals (Lead, Zinc, etc)
Galvanized steel
Non-metals
Flammable materials
Safety Notes
- Plasma radiation and UV can damage eyesight. Shade 5 eye protection or darker required.
• Wear welding gloves, face protection, cotton clothing (no synthetics) and closed toe shoes.
• Ear protection recommended.
• Toxic fumes may be emitted, especially from chromium-containing alloys such as stainless steel and tool steels. Wear a respirator in those cases.
• Arc ignites immediately when torch trigger is pushed.
- It cuts quickly through gloves and skin. - Keep hands, clothes, and objects away from the torch tip. - Keep hands clear of the cutting path. - Never hold the workpiece. - Never point the torch toward yourself or others.
* Various safety links to keep you awake at night:
ANSI - General Safety in Welding and Cutting
Best Practices
| |
|---|---|
- A hard-copy of the Operator's Manual is stored in the carrying case.
- ALWAYS WEAR EYE PROTECTION! It is mandatory in the Metal Shop, even if you aren't doing anything but looking around.
- For the plasma cutter, wear Shade 5 goggles or better. The requirement is similar to that for the Oxy-Acetylene Torch.
- Instant-On Torch. Before plugging in, make sure the power switch is in the OFF (O) position. Hand Torch safety catch reduces accidental firing.
- Remove flammable objects and liquids from the work area.
- Note fire extinguisher location and use.
- Do not use a drum or other closed container as a cutting table.
Machine Set-Up
In general this device is pretty easy to use.
Unpacking
| |
|---|---|
| The power supply only fits one way. |
| |
|---|---|
| Someone spent a lot of time designing this compact carrying case. |
Perhaps the most difficult part is unpacking the plasma cutter from the carrying case and replacing it when finished. The cables are coiled very tightly in the left side of the case and the power supply seats on the right.
Note the asymmetry in the recesses at the bottom of the case. The power supply only fits one way back into the case, with the faceplate pointing towards the coils of cables. If you try to fit it in the wrong way around you won't be able to latch the box top, and then you won't be able to carry it using the handle.
