Category:Drill Presses
From Artisans Asylum Wiki
| Drill Press | |
|---|---|
| General Info | |
| Make | various |
| Model | |
| Serial | |
| Specs | |
| Manual | |
| Asylum Info | |
| Location | Wood Shop |
| Rubric | |
| Training | |
| Testing | |
| Restrictions | red |
Description
A drill press is a free-standing power tool with a vertical sliding spindle that carries a chuck for drilling. The spindle, or "quill" is moved up and down manually by a wheel or handle to the side. The workpiece is supported by a horizontal table with adjustable height. Workpieces are clamped down to the table or held in a vise while they are drilled to varying diameters, generally ranging from 1/16" up to 3/4".
Use For (Depending on Location)
Wood
Metal
Plastic
Composites
Graphite
Do Not Use For
Thin sheets
Ceramics or other abrasive materials
Material that is unsuitable to the shop where the tool is located.
Pages in category "Drill Presses"
The following 6 pages are in this category, out of 6 total.
