Category:Vertical Band Saws -- Wood Cutting
From Artisans Asylum Wiki
| Wood Cutting Band Saw | |
|---|---|
| General Info | |
| Make | |
| Model | |
| Serial | |
| Specs | |
| Manual | |
| Asylum Info | |
| Location | [[:Category:|]] |
| Rubric | |
| Training | |
| Testing | |
| Restrictions | |
[[Category:]]
Description
The cutting blade in a band saw is a continuous loop that travels through the machine on pulleys. In a vertical band saw, the blade travels vertically through a slot in a table, and workpieces are hand-fed through the blade to make a cut.
Wood-grain affects the forces and motions during cutting in a saw, so there is a ripping fence and a miter gauge as in a table saw. With metal cutting, the workpiece is usually clamped in a vise.
Use For
- Dry, flat lumber
- Boards
- Plywood sheets
Do Not Use For
- Logs, carvings, or other irregular lumber
- Pressure-treated
- Wet lumber
- Plastic
- Metal or metal-coated
- Composites
- Carbon-filled materials
Pages in category "Vertical Band Saws -- Wood Cutting"
The following 2 pages are in this category, out of 2 total.
