Brackets Tutorial 4: Basic Cardboard Aided Design

Link to: Bracketage Main Page

Introduction

Some people may find it easier to make a cardboard prototype of a sheet metal part rather than designing it in CAD. This tutorial shows how to convert a cardboard prototype into an image file and upload it to the CNC plasma cutter.

We will be making a bracket to hold the E-STOP button to the frame of the CNC plasma cutter.

Prototyping

If you don't have the time or the inclination to use a CAD system or a 3D printer, you can perform what we call "Rapid Prototyping" using drafting tools and paints.

Cut a cardboard prototype as shown at actual size. Make sure it is colored either bright white or deep black to ease the scanning step. Note the dangling feature along the bottom edge, which is folded to make an angle brace.

Holes are defined by drawing spots of the contrasting color.

Image Processing

Scan the Prototype

If the prototype is 8-1/2" x 11" or smaller, you can scan it on a regular flatbed scanner. This is particularly convenient because it preserves the original scale of the part.

If the prototype is larger than the bed of the scanner, you will need to scan it in sections and paste them together using a graphics utility such as Photoshop or Paint.

Please note: You will need to place a solid background over the prototype to make a good scan. The image shown left is just an illustration. The scanned image to the right was made with a black piece of paper over the cardboard, and the scanner cover closed.

Inverting the Contrast

In the example shown, the cardboard prototype was painted white, with the holes marked in black. The Torchmate CAD utility program will only accept a black-on-white image.

For purposes of teaching, the bracket was designed this way. Of course it is possible to paint the cardboard black and use white ink to define the holes and skip the inversion step.

In this section we will show how to accentuate and reverse the image contrast using the "Paint" utility program as an example. The tools used should be available in a very wide variety of graphics utilities on any computer. if your graphics utility includes an "Invert" feature, you can use that instead of the following sequence.

• First, you may need to clean up the image a bit. Open the scan and save it as a "monochrome bitmap."

Please note: The original scanned image has been modified to round out the circular holes and tidy up the edges. An ear has been added on the upper left edge. Note how the color options are limited when working with monochrome images.

• Once the black-and-white image has been saved, select it (CTRL-A) and copy it to the clipboard (CTRL-C)

• Open the "File" menu and pick "New"

• The new file will open in full color. Paste the black-and-white version into the new window.

• Select some color that isn't black or white and select the "Paint Can" tool as shown.

In the three images that follow, the "Paint Can" tool is used with the colors in sequence: RED, WHITE, BLACK to color the appropriate areas of the image. The body of the bracket should end up black; the space around it and also the holes should end up white.

Please note: This process only works cleanly with images that have passed through the conversion to monochrome. If you try this on a regular full-color JPEG the results won't be satisfactory.

Save the new image. This is what will be uploaded to Torchmate CAD.

Creating a Tool Path

We will use the utility application Torchmate CAD 8 (TMCAD) to convert the image file into a tool path for the CNC plasma cutter. Click on the Torchmate CAD icon to start.

A blank document will open. Click on the "File" menu and select "Import."

A file picker window will open. Select the black-on-white scan file and click "Open."

The TMCAD window will show a small right-angle cursor to help locate the image on the desktop. When you click the left mouse button the image should appear below and to the right.

Select the "Accuscan" tool from the tool bar in the left margin.

The use of the Accuscan tool is described on pp. 47-56 of the TMCAD user guide.

A new tool bar will appear just below the standard Windows menu bar. The important tool is near the right end, called "Vectorization." Click on it. This will create an outline of the black features in the selected image.

You can separate the two entities if you click the mouse on the image and drag it sideways. You can delete the solid image at this point, all you need is the outline.

Note: If you see two solid images instead of the view shown, go to the "View" menu and unselect the item "Show Fill".

From here on in the procedure is quite simple. Select the outline and verify the external dimensions coincide with your cardboard prototype. If you want to rotate it or change the scale you can do it here.

Make sure the outline is selected and pull down the "Arrange" menu. Select "Make Path."

Next pull down the "Machine" menu and select "Create Tool Path." A popup sub-menu should appear. Choose one of the three options: "Online", "Male" and "Female." These determine how the tool width compensation is applied. Since this is an imprecise method, the "Online" option is probably the safest.

The tool path options are described on pp. 93-95 of the TMCAD user guide.

The last step in TMCAD is to pull down the "File" menu and select "Export..." Save the file as DXF, with the "Polyline" option. This is the most reliable.

Cut the Part

The CNC plasma cutter at Artisans Asylum is an amazing tool that requires training and tool testing to use. Classes are available. Please consult the class list on the Metal Shop main page for offerings.

Import the DXF file into Torchmate

For a summary description of the use of the Torchmate software to set up a cut, please see Chapter 3 of the Plasmatron Training Doc.

Click on the Torchmate 4 icon to start. The first image to appear will ask whether or not you want to connect the software to the machine. You don't have to connect to process the data, but you will need to if you are going to cut the part.

A blank document window should open. Pull down the "File" menu and select "Import DXF."

A file picker window will open allowing you to select the DXF file we created in the previous section.

Once you hit "Open" another file picker window will appear. This gives you the option to specify a name and a location for the G-Code file that will be created.

The process concludes with a third dialog box that allows you to specify different parameters for the converted tool path.

Among the most important features are the "Scale" factor in the upper left corner. To preserve the part dimensions, this must be 1.000. This is your last chance to change the scale of the part if you prefer.

In the upper right corner, you can specify the cutting speed for the machine if you know it. This isn't necessary at this point: You have several opportunities to set it.

Partway down the right margin, you can apply tool width compensation if you want it. If desired, select a tool number between 4 and 12. Tool 4 applies a compensation of 0.04" and so on like that. Tool 6 is the most commonly used one.

Once you hit "Okay" the tool path should be displayed in the graphics window.

Set Up the Machine and Cut

For a detailed description of the operation of the CNC plasma cutter, please read the Training Document. You will need to be tool-tested on this machine before you are permitted to operate it.

Assemble the nozzle package and install it on the torch.

Switch on the power to the torch, the signal generator, and the torch-height controller.

Place a sheet of mild steel on the bed of the machine and jog the gantry over to an open section of the sheet.

Check the cutting parameters for the sheet material you are using.

Perform a dry run to make sure the tool path doesn't run off the edge of the sheet.

CUT!!! The cur part is shown below with the cardboard pattern.