48-inch Jump Shear: Difference between revisions
From Artisans Asylum Wiki
No edit summary |
No edit summary |
||
| Line 40: | Line 40: | ||
'''Refer to chart on the machine''' | '''Refer to chart on the machine''' | ||
{| class="infobox" cellspacing="5" style="width: 22em; text-align: left; font-size: 100%; line-height: 1.5em;" | |||
! colspan="2" class="infobox-image" | [[File:Metal_Shop_jump_shear_thickness_capacity.png|600px|bender mounting]] | |||
|- | |||
| colspan="2" | Equivalent thickness for different metals relative to mild steel. | |||
|- | |||
|} | |||
Revision as of 12:11, 8 February 2024
| 48-inch Jump Shear | |
|---|---|
| General Info | |
| Make | Central Machinery |
| Model | 12-Ton |
| Serial | Unknown |
| Specs | n/a |
| Manual | Manual |
| Asylum Info | |
| Location | Metal Shop |
| Rubric | n/a |
| Training | Tool classes |
| Testing | Tool testing, or [[:Category:Metal Shop#Tool Testing
Night|come to the shop on Tool Testing Night]] |
| Restrictions | green |
Use for:
- Up to 16 ga (0.0625") sheet metal, any metal is okay
- Note that different metals have different thickness limits.
Do Not Use for:
- Any sheet metal exceeding max thickness
Hazard Analysis
- The workpiece can snap unexpectedly or break. Eye Protection Required
- Caught-between injuries when cutting
- Don’t pinch hands in the machine’s moving parts
- Don’t smash a foot under the foot petal
- Shin injuries from slipping off the foot pedal
- Cuts/ scrapes from sharp cut edges of work
 |
 |
Eye protection required! |
|---|---|---|
Operation Notes
- To perform multiple cuts of the same length, use the backstop and front stop attachments (stored under the pan and box brake).
- Thickness limits are different for different metals.
Refer to chart on the machine
| |
|---|---|
| Equivalent thickness for different metals relative to mild steel. |
