Carbide Blade Chop Saw (Metal Devil)

From Artisans Asylum Wiki
Revision as of 15:35, 9 February 2024 by Jfbredt (talk | contribs) (Created page with "Category:ToolsCategory:Metal Shop {{ToolBox |tool_title = Carbide Blade Chop Saw |tool_subtitle = Carbide Blade Chop Saw |image = Metal_shop_carbide chop_saw_labeled.png |caption = Metal Devil |make = Morse |model = CSM14MB |serial = Unknown |manufacturer_specs = |manual = [https://drive.google.com/file/d/1EhQmfm-YUoENJBB4aR7tEXBAjAxGWNit/view?usp=drive...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)



Carbide Blade Chop Saw
Metal Devil
General Info
Make Morse
Model CSM14MB
Serial Unknown
Specs
Manual Metal Devil Manual
Asylum Info
Location Metal Shop
Rubric
Training Tool classes
Testing Tool testing, or [[:Category:Metal Shop#Tool Testing

Night|come to the shop on Tool Testing Night]]

Restrictions red

Metal Shop


Use for:

  • Cutting through steel and other tough metals.
  • See chart belo for recommended cutting capacities.

Do Not Use for:

  • Workpieces that exceed the saw’s limits or cannot be secured by the saw’s clamp.
  • Never use in damp or wet conditions.
  • Never use near flammable liquids or gases.

Hazard Analysis

Retrieved from "http://wiki.artisansasylum.com/index.php?title=Carbide_Blade_Chop_Saw_(Metal_Devil)&oldid=1642"