Category:Vertical Band Saws -- Wood Cutting: Difference between revisions
From Artisans Asylum Wiki
No edit summary |
No edit summary |
||
Line 24: | Line 24: | ||
Wood-grain affects the forces and motions during cutting in a saw, so there is a ripping fence and a miter gauge as in a table saw. With metal cutting, the workpiece is usually clamped in a vise. | Wood-grain affects the forces and motions during cutting in a saw, so there is a ripping fence and a miter gauge as in a table saw. With metal cutting, the workpiece is usually clamped in a vise. | ||
==Use For== | |||
* Dry, flat lumber | |||
* Boards | |||
* Plywood sheets | |||
==Do Not Use For== | |||
* Logs, carvings, or other irregular lumber | |||
* Pressure-treated | |||
* Wet lumber | |||
* Plastic | |||
* Metal or metal-coated | |||
* Composites | |||
* Carbon-filled materials |
Revision as of 15:09, 23 February 2024
Wood Cutting Band Saw | |
---|---|
General Info | |
Make | |
Model | |
Serial | |
Specs | |
Manual | |
Asylum Info | |
Location | [[:Category:|]] |
Rubric | |
Training | |
Testing | |
Restrictions |
[[Category:]]
Description
The cutting blade in a band saw is a continuous loop that travels through the machine on pulleys. In a vertical band saw, the blade travels vertically through a slot in a table, and workpieces are hand-fed through the blade to make a cut.
Wood-grain affects the forces and motions during cutting in a saw, so there is a ripping fence and a miter gauge as in a table saw. With metal cutting, the workpiece is usually clamped in a vise.
Use For
- Dry, flat lumber
- Boards
- Plywood sheets
Do Not Use For
- Logs, carvings, or other irregular lumber
- Pressure-treated
- Wet lumber
- Plastic
- Metal or metal-coated
- Composites
- Carbon-filled materials
Pages in category "Vertical Band Saws -- Wood Cutting"
The following 2 pages are in this category, out of 2 total.