Flex Shaft Die Grinder: Difference between revisions

From Artisans Asylum Wiki
No edit summary
No edit summary
Line 53: Line 53:
==Operation Notes==
==Operation Notes==
{| class="infobox" cellspacing="5" style="width: 22em; text-align: left; font-size: 100%; line-height: 1.5em;"
{| class="infobox" cellspacing="5" style="width: 22em; text-align: left; font-size: 100%; line-height: 1.5em;"
! colspan="2" class="infobox-image" | [[File:Metal_shop_flex_shaft_parts.png|300px|flex shaft w labels ]]
! colspan="2" class="infobox-image" | [[File:Metal_shop_flex_shaft_parts.png|400px|flex shaft w labels ]]
|-
|-
| colspan="2" |  The parts of the flex shaft.
| colspan="2" |  The parts of the flex shaft.

Revision as of 12:48, 9 February 2024



Flex Shaft Die Grinder
Who's the cat that won't cop out when there's danger all about? (SHAFT!)
General Info
Make Foredom
Model CC
Serial Unknown
Specs
Manual
Asylum Info
Location Metal Shop
Rubric
Training Tool classes
Testing Tool testing, or [[:Category:Metal Shop#Tool Testing

Night|come to the shop on Tool Testing Night]]

Restrictions green


Use for:

  • The motor has a maximum speed rating of 18,000 RPM. Always use an accessory which has the same or a higher rating than your tool.
  • This flexible shaft power tool tolerates up to 12 lbs. of torque.
  • The CC Series is a general, all purpose motor.
  • Hand Piece accepts any size shank up to 5/32” (4mm) diameter.

Do Not Use for:

  • Consider another tool for heavy duty or industrial applications. Die grinders and air tools are heavy duty alternatives.

Hazard Analysis

Goggle mask.png
  • Debris, chips, and sparks can become airborne during the use of this tool. Safety glasses or face shield required.
  • Mask or respirator recommended to prevent inhalation of dust particles.
  • No loose clothing, jewelry, neckties, etc. Tie back long hair. Loose items can cause injury when drawn in to the tool’s rotating parts.
  • Never operate an accessory at speeds above the accessory’s rated maximum speed. Serious injury can result if an accessory breaks during use.
  • This tool vibrates during use. Secure the motor to its hanger or work surface to prevent it from falling.

Operation Notes

flex shaft w labels
The parts of the flex shaft.
  • The Foredom Flex Shaft as four components:

- The Motor

- The Flex Shaft (with sheath covering and inner shaft)

- The Foot Pedal (for variable speed control).

- The Hand Piece (with three jaw chuck and key).

  • Let the speed of the tool do the work. Do not apply heavy pressure to the accessory.
  • Generally, slower speeds are used for rougher, heavier work, or when greater control over the accessory is required for precise, delicate work. Higher speeds are used for buffing, cutting and polishing.
  • Always replace the dust cover when the tool is not in use. Metal dust entering the motor’s ventilation slots can shorten the tool’s life.
  • Never put sharp bends in the Flex Shaft and its sheath. This causes excessive wear at the points of greatest friction. Maintain a 4” minimum operating radius.