Flex Shaft Die Grinder

From Artisans Asylum Wiki
Revision as of 11:48, 9 February 2024 by Jfbredt (talk | contribs)



Flex Shaft Die Grinder
Who's the cat that won't cop out when there's danger all about? (SHAFT!) Foredom.
General Info
Make Foredom
Model CC
Serial Unknown
Specs
Manual
Asylum Info
Location Metal Shop
Rubric
Training Tool classes
Testing Tool testing, or [[:Category:Metal Shop#Tool Testing

Night|come to the shop on Tool Testing Night]]

Restrictions green


Use for:

  • The motor has a maximum speed rating of 18,000 RPM. Always use an accessory which has the same or a higher rating than your tool.
  • This flexible shaft power tool tolerates up to 12 lbs. of torque.
  • The CC Series is a general, all purpose motor.
  • Hand Piece accepts any size shank up to 5/32” (4mm) diameter.

Do Not Use for:

  • Consider another tool for heavy duty or industrial applications. Die grinders and air tools are heavy duty alternatives.

Hazard Analysis

  • Debris, chips, and sparks can become

airborne during the use of this tool. Safety glasses or face shield required. • Mask or respirator recommended to prevent inhalation of dust particles. • No loose clothing, jewelry, neckties, etc. Tie back long hair. Loose items can cause injury when drawn in to the tool’s rotating parts. • Never operate an accessory at speeds above the accessory’s rated maximum speed. Serious injury can result if an accessory breaks during use. • This tool vibrates during use. Secure motor to its hanger or work surface to prevent it from falling.