Open Face Paint Booth: Difference between revisions

From Artisans Asylum Wiki
No edit summary
m (Added link to training rubric)
 
(6 intermediate revisions by the same user not shown)
Line 7: Line 7:
|model              = DFOCG-100606-HSB-2L
|model              = DFOCG-100606-HSB-2L
|serial            = Unknown
|serial            = Unknown
|manufacturer_specs = [https://globalfinishing.com/product/open-face-paint-booth from manufacturer]
|manufacturer_specs = [https://globalfinishing.com/product/open-face-paint-booth From manufacturer]
|manual            = [https://dl.mitsubishielectric.com/dl/fa/document/manual/inv/ib0600503eng/ib0600503engm.pdf | FR-DUO8 control panel]
|manual            = [https://dl.mitsubishielectric.com/dl/fa/document/manual/inv/ib0600503eng/ib0600503engm.pdf FR-DUO8 control panel]
|location          = Finishing Shop
|location          = Finishing Shop
|tool_categories    = [[Category:Finishing]]
|tool_categories    = [[Category:Finishing Shop]]
|rubric            = ask the shop lead
|rubric            = [[Finishing Shop Training Rubric]]
|training          = https://www.artisansasylum.com/tool-testing
|training          = [https://www.artisansasylum.com/tool-testing Sign up here]
|testing            = https://www.artisansasylum.com/tool-testing
|testing            = [https://www.artisansasylum.com/tool-testing Sign up here]
|restrictions      = red
}}
}}


== Stuff ==
The Open Face Paint Booth, often called a spray booth, is a 10'-4" x 8'-10" x 9'-2" (W x H x D) booth with a powerful fan that ventilates to the outside. It is the heart of the finishing room.


Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Arcu odio ut sem nulla pharetra diam. Curabitur vitae nunc sed velit dignissim sodales. Magna sit amet purus gravida. At ultrices mi tempus imperdiet nulla malesuada. Sapien faucibus et molestie ac feugiat sed lectus vestibulum. Neque vitae tempus quam pellentesque nec nam aliquam. Posuere lorem ipsum dolor sit amet consectetur. Ultricies leo integer malesuada nunc vel. Tellus molestie nunc non blandit massa enim nec dui nunc.
== Usage ==


Quis lectus nulla at volutpat diam ut venenatis tellus in. Tellus mauris a diam maecenas sed enim ut. Lorem ipsum dolor sit amet consectetur adipiscing. Eget duis at tellus at urna. A diam maecenas sed enim ut sem. Felis donec et odio pellentesque diam volutpat commodo sed. Placerat duis ultricies lacus sed turpis tincidunt id. Eleifend donec pretium vulputate sapien nec sagittis aliquam malesuada bibendum. Augue interdum velit euismod in pellentesque. Odio ut enim blandit volutpat maecenas volutpat blandit aliquam. Mattis rhoncus urna neque viverra justo nec. Nulla pharetra diam sit amet nisl suscipit adipiscing. Eget velit aliquet sagittis id consectetur. Quam nulla porttitor massa id. Aenean sed adipiscing diam donec adipiscing. Feugiat nisl pretium fusce id. Amet facilisis magna etiam tempor orci eu lobortis elementum.
Training and testing is required before using this tool and the Finishing Shop.


== More Stuff ==
The control panel is on the side of the booth past the opening as you walk into the shop. All operating instructions are on signs posted to the right of the control panel.


Fusce id velit ut tortor pretium viverra suspendisse potenti nullam. Commodo elit at imperdiet dui accumsan. Sit amet facilisis magna etiam. Commodo ullamcorper a lacus vestibulum sed arcu. Sagittis orci a scelerisque purus semper eget. Lorem sed risus ultricies tristique nulla aliquet enim. Lectus sit amet est placerat. Neque volutpat ac tincidunt vitae semper quis. Massa vitae tortor condimentum lacinia quis vel eros. Pellentesque elit ullamcorper dignissim cras tincidunt. Eu feugiat pretium nibh ipsum consequat nisl vel pretium lectus. Pretium nibh ipsum consequat nisl vel pretium lectus quam id. Lobortis mattis aliquam faucibus purus in massa tempor. Ipsum dolor sit amet consectetur adipiscing elit. Arcu non odio euismod lacinia at quis risus sed vulputate. Enim nec dui nunc mattis enim. Faucibus et molestie ac feugiat sed lectus. Lobortis feugiat vivamus at augue. Ornare suspendisse sed nisi lacus sed viverra tellus.
=== How to apply finish in the booth ===


Tincidunt tortor aliquam nulla facilisi cras fermentum. Enim ut tellus elementum sagittis. Porttitor eget dolor morbi non arcu risus. Lorem mollis aliquam ut porttitor leo a diam sollicitudin tempor. Enim nunc faucibus a pellentesque sit amet porttitor eget. Tincidunt vitae semper quis lectus nulla. Id neque aliquam vestibulum morbi. Arcu cursus euismod quis viverra nibh cras pulvinar mattis nunc. Purus gravida quis blandit turpis cursus in hac habitasse. Vitae purus faucibus ornare suspendisse sed. A erat nam at lectus urna duis convallis convallis. Gravida arcu ac tortor dignissim convallis aenean et. Augue neque gravida in fermentum et sollicitudin ac orci. Quam vulputate dignissim suspendisse in est ante in nibh mauris. Pharetra convallis posuere morbi leo urna molestie. Tortor at auctor urna nunc id. Pharetra convallis posuere morbi leo. Non enim praesent elementum facilisis leo vel fringilla est ullamcorper. Id donec ultrices tincidunt arcu non sodales neque sodales. Lacus suspendisse faucibus interdum posuere.
* Hang your work from the rolling hanger, place it on the rolling table, or put it on the floor of the booth as appropriate.
* Make sure that there is a drop cloth underneath your work.
* [[#How to start the booth|Start the booth]].
* Put on PPE (gloves, safety glasses, respirator, coveralls) as appropriate.
* Apply your finish:
** If painting, wiping, or pouring, make sure there's a drop cloth underneath your work.
** If spraying, spray INTO the pads, not at the wall, ceiling, or floor. Rotate or reposition your work as necessary.
* Leave your work in the booth until it can be safely moved. Leave the fan running at the lowest speed while your work is still in the booth to remove any offgassing finish.
* Move your work to the drying tables as quickly as possible.


== Other Stuff ==
=== How to start the booth ===


Bibendum enim facilisis gravida neque convallis a cras semper auctor. Egestas congue quisque egestas diam. Elit eget gravida cum sociis. Ut venenatis tellus in metus vulputate. Feugiat sed lectus vestibulum mattis ullamcorper velit sed ullamcorper morbi. Vestibulum rhoncus est pellentesque elit ullamcorper dignissim cras. Amet purus gravida quis blandit turpis cursus in hac habitasse. Risus pretium quam vulputate dignissim suspendisse in est. Nunc congue nisi vitae suscipit tellus mauris a. Pellentesque id nibh tortor id aliquet lectus proin nibh nisl. Enim ut sem viverra aliquet eget sit amet tellus. In pellentesque massa placerat duis ultricies lacus sed turpis. A cras semper auctor neque vitae tempus quam pellentesque nec. Adipiscing diam donec adipiscing tristique risus nec feugiat in fermentum. Gravida cum sociis natoque penatibus et magnis dis. Adipiscing diam donec adipiscing tristique risus nec feugiat.
* Turn the booth power from '''Off''' to '''On'''.
* Turn the booth lights from '''Off''' to '''On'''.
* Press the green '''START''' button.
* Wait for the '''SYSTEM ENERGIZED''' and '''EXHAUST UNIT ON''' lights to light up.
* Turn the dial on the speed controller to your desired speed, and then press '''Set'''. Suggested settings:
** 30: Most [https://www.epa.gov/indoor-air-quality-iaq/what-are-volatile-organic-compounds-vocs low VOC] painting and spraying
** 40-50: Moderate VOC painting and spraying
** 60: High VOC painting and spraying
 
{{Imbox |text=Do not press any other button besides '''Set''' on the controller, otherwise you might accidentally change system settings.}}
 
=== How to shut down the booth ===
 
* Press the red '''STOP''' button.
* Wait for the '''SYSTEM ENERGIZED''' and '''EXHAUST UNIT ON''' lights to turn off.
* Turn the booth lights from '''On''' to '''Off'''.
* Turn the booth power from '''On''' to '''Off'''.
 
== Maintenance ==
 
Typical maintenance procedures include changing the paper drop cloth on the floor of the booth, swapping out the pads, and checking the booth airflow. The shop lead will perform all maintenance -- please don't do any of this work yourself.
 
[mailto:finishingshop@artisansasylum.com Email the shop lead] if anything needs maintenance.
 
For reference, [https://globalfinishing.com/wp-content/uploads/2022/01/Dry_Filter_Booths_Service_and_Maintenance_Manual.pdfhere is the complete service and maintenance manual].
 
== Common problems ==
 
=== Overspray ===
 
Clean up all overspray promptly with a solvent compatible with your finish. Overspray can build up and create layers of uncured finish, which becomes a fire hazard.
 
=== Leaks ===
 
Clean up all leaks promptly. If you're pouring epoxy and the leaks have already set and there's no dropcloth underneath, [mailto:finishingshop@artisansasylum.com notify the shop lead], let the epoxy cure completely, and then chip or grind any epoxy that's bonded to the concrete.
 
=== The controller doesn't display the set frequency (Hz) on startup ===
 
[mailto:finishingshop@artisansasylum.com Notify the shop lead] when this happens -- don't attempt this procedure yourself. If you make a mistake, you can set controller parameters that cause the fan to malfunction.
 
Display the set frequency on the controller, then hold the "Set" button for one second. This will set the default power on display to display the frequency.

Latest revision as of 11:25, 4 February 2024


Open Face Paint Booth
The paint booth in its natural environs
General Info
Make Global Finishing Solutions
Model DFOCG-100606-HSB-2L
Serial Unknown
Specs From manufacturer
Manual FR-DUO8 control panel
Asylum Info
Location Finishing Shop
Rubric Finishing Shop Training Rubric
Training Sign up here
Testing Sign up here
Restrictions red


The Open Face Paint Booth, often called a spray booth, is a 10'-4" x 8'-10" x 9'-2" (W x H x D) booth with a powerful fan that ventilates to the outside. It is the heart of the finishing room.

Usage

Training and testing is required before using this tool and the Finishing Shop.

The control panel is on the side of the booth past the opening as you walk into the shop. All operating instructions are on signs posted to the right of the control panel.

How to apply finish in the booth

  • Hang your work from the rolling hanger, place it on the rolling table, or put it on the floor of the booth as appropriate.
  • Make sure that there is a drop cloth underneath your work.
  • Start the booth.
  • Put on PPE (gloves, safety glasses, respirator, coveralls) as appropriate.
  • Apply your finish:
    • If painting, wiping, or pouring, make sure there's a drop cloth underneath your work.
    • If spraying, spray INTO the pads, not at the wall, ceiling, or floor. Rotate or reposition your work as necessary.
  • Leave your work in the booth until it can be safely moved. Leave the fan running at the lowest speed while your work is still in the booth to remove any offgassing finish.
  • Move your work to the drying tables as quickly as possible.

How to start the booth

  • Turn the booth power from Off to On.
  • Turn the booth lights from Off to On.
  • Press the green START button.
  • Wait for the SYSTEM ENERGIZED and EXHAUST UNIT ON lights to light up.
  • Turn the dial on the speed controller to your desired speed, and then press Set. Suggested settings:
    • 30: Most low VOC painting and spraying
    • 40-50: Moderate VOC painting and spraying
    • 60: High VOC painting and spraying


How to shut down the booth

  • Press the red STOP button.
  • Wait for the SYSTEM ENERGIZED and EXHAUST UNIT ON lights to turn off.
  • Turn the booth lights from On to Off.
  • Turn the booth power from On to Off.

Maintenance

Typical maintenance procedures include changing the paper drop cloth on the floor of the booth, swapping out the pads, and checking the booth airflow. The shop lead will perform all maintenance -- please don't do any of this work yourself.

Email the shop lead if anything needs maintenance.

For reference, is the complete service and maintenance manual.

Common problems

Overspray

Clean up all overspray promptly with a solvent compatible with your finish. Overspray can build up and create layers of uncured finish, which becomes a fire hazard.

Leaks

Clean up all leaks promptly. If you're pouring epoxy and the leaks have already set and there's no dropcloth underneath, notify the shop lead, let the epoxy cure completely, and then chip or grind any epoxy that's bonded to the concrete.

The controller doesn't display the set frequency (Hz) on startup

Notify the shop lead when this happens -- don't attempt this procedure yourself. If you make a mistake, you can set controller parameters that cause the fan to malfunction.

Display the set frequency on the controller, then hold the "Set" button for one second. This will set the default power on display to display the frequency.