File list
From Artisans Asylum Wiki
This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | User | Description | Versions |
|---|---|---|---|---|---|---|
| 23:07, 2 May 2024 | ENR Inventory.pdf (file) |  |
140 KB | TidyBoxedElectrons | 6 | |
| 12:47, 2 May 2024 | Angela 20240318 uncropped.jpg (file) |  |
253 KB | Jfbredt | 2 | |
| 12:44, 2 May 2024 | Angela 20240318.jpg (file) |  |
196 KB | Jfbredt | Reverted to version as of 16:05, 20 March 2024 (UTC) | 3 |
| 00:26, 2 May 2024 | Lousy brush exercise.png (file) |  |
791 KB | Jfbredt | 1 | |
| 00:23, 2 May 2024 | Lousy brush exercise.jpg (file) |  |
185 KB | Jfbredt | 1 | |
| 23:45, 1 May 2024 | Page 151 from readinginthebrain.jpg (file) |  |
350 KB | Jfbredt | 1 | |
| 23:45, 1 May 2024 | Drawing warmups 2 hi f.jpg (file) |  |
163 KB | Jfbredt | 1 | |
| 21:57, 1 May 2024 | Drawing warmups.jpg (file) |  |
377 KB | Jfbredt | 2 | |
| 19:57, 1 May 2024 | WOB1.png (file) |  |
1,000 KB | Jfbredt | 1 | |
| 19:56, 1 May 2024 | WOB2.png (file) |  |
915 KB | Jfbredt | 2 | |
| 19:39, 1 May 2024 | Madeleine 2023.jpg (file) |  |
293 KB | Jfbredt | 1 | |
| 19:33, 1 May 2024 | Aren WOB 20240422.png (file) |  |
1.14 MB | Jfbredt | 1 | |
| 19:23, 1 May 2024 | Anna back cropped 20240401.jpg (file) |  |
629 KB | Jfbredt | 1 | |
| 19:14, 1 May 2024 | Paul WOB 20240422.jpg (file) |  |
238 KB | Jfbredt | 1 | |
| 19:49, 29 April 2024 | Cyclone-Manual-FT-6035-5532.pdf (file) | |
474 KB | Jfbredt | 1 | |
| 15:10, 29 April 2024 | Aren intense.png (file) |  |
830 KB | Jfbredt | 1 | |
| 22:01, 26 April 2024 | Blaster hopper drain 2.jpg (file) |  |
168 KB | Jfbredt | 1 | |
| 22:01, 26 April 2024 | Blaster hopper drain 3.jpg (file) |  |
157 KB | Jfbredt | 1 | |
| 22:00, 26 April 2024 | Blaster hopper drain 4.jpg (file) |  |
203 KB | Jfbredt | 1 | |
| 21:01, 26 April 2024 | Sandblaster gun with dip tube.jpg (file) |  |
379 KB | Jfbredt | 1 | |
| 20:51, 26 April 2024 | Ventri effect.png (file) |  |
190 KB | Jfbredt | 1 | |
| 20:16, 26 April 2024 | Sandblaster vent switch.jpg (file) |  |
117 KB | Jfbredt | 1 | |
| 19:36, 26 April 2024 | Blaster with dust collector labeled.jpg (file) |  |
302 KB | Jfbredt | 1 | |
| 17:54, 24 April 2024 | Metal shop lead test YES.jpg (file) |  |
96 KB | Jfbredt | 1 | |
| 17:53, 24 April 2024 | Metal shop lead test NO.jpg (file) |  |
86 KB | Jfbredt | 1 | |
| 17:50, 24 April 2024 | Metal shop lead test swabs.png (file) |  |
368 KB | Jfbredt | 1 | |
| 17:49, 24 April 2024 | Metal shop lead test instructions.png (file) |  |
728 KB | Jfbredt | 1 | |
| 10:38, 24 April 2024 | No lead warning.png (file) |  |
3 KB | Jfbredt | 1 | |
| 10:27, 24 April 2024 | Blaster dust hazard.png (file) |  |
9 KB | Jfbredt | 1 | |
| 23:25, 23 April 2024 | Metal shop sandblaster action shot.jpg (file) |  |
212 KB | Jfbredt | 1 | |
| 22:28, 12 April 2024 | Logan collet closer at home.jpeg (file) |  |
1.35 MB | Dankulla | When it's not in use, the Logan collet closer lives on a mount behind the lathe. | 1 |
| 22:27, 12 April 2024 | Logan collet closer adjustment.jpeg (file) |  |
1.22 MB | Dankulla | the locking tab is up, so the collet closer adjustment is unlocked, and the collet closer tension can be adjusted. | 1 |
| 22:26, 12 April 2024 | Logan collet closer adjustment locked.jpeg (file) |  |
1.17 MB | Dankulla | the locking tab is down, so the collet closer adjustment is locked in place. | 1 |
| 22:22, 12 April 2024 | Logan collet closer headstock.jpeg (file) |  |
1.41 MB | Dankulla | Overview of the headstock end of the Logan collet closer | 1 |
| 22:13, 12 April 2024 | Logan collet closer components.jpeg (file) |  |
1.39 MB | Dankulla | overview of the Logan's 5C collet closer setup | 1 |
| 21:53, 12 April 2024 | Logan chuck removal.jpeg (file) |  |
1.53 MB | Dankulla | Yours Truly, removing a chuck from the Logan Lathe | 1 |
| 21:51, 12 April 2024 | Logan apron controls.jpeg (file) |  |
1.51 MB | Dankulla | updated version: use "power feed" names instead of "auto feed" to be consistent with article text. | 2 |
| 21:34, 12 April 2024 | Logan headstock controlls.jpeg (file) |  |
1.64 MB | Dankulla | Overview of the Logan lathe headstock controls, including the back gear lever, the power feed direction selector, and the feed rate/thread pitch adjustment | 1 |
| 21:27, 12 April 2024 | Logan clutch collar disengaged.jpeg (file) |  |
939 KB | Dankulla | Logan clutch collar disengaged from the spindle | 1 |
| 21:26, 12 April 2024 | Logan clutch collar engaged.jpeg (file) |  |
919 KB | Dankulla | Logan clutch collar engaged with the spindle | 1 |
| 20:51, 12 April 2024 | Sb motor and belts annotated.jpeg (file) |  |
1.38 MB | Dankulla | an annotated photo of the South Bend motor, belts, and pulleys | 2 |
| 20:41, 12 April 2024 | Sb removing chuck.jpeg (file) |  |
448 KB | Dankulla | removing a chuck from the South Bend lathe | 1 |
| 20:33, 12 April 2024 | Sb apron controls.jpeg (file) |  |
1.62 MB | Dankulla | overview of South Bend apron controls | 1 |
| 20:23, 12 April 2024 | Sb power feed settings.jpeg (file) |  |
1.62 MB | Dankulla | Overview of power feed and threading headstock controls on the South Bend lathe | 1 |
| 20:10, 12 April 2024 | Sb back gear and locking pin.jpeg (file) |  |
1.56 MB | Dankulla | overview of the south bend headstock spindle speed controls | 1 |
| 19:37, 12 April 2024 | Sb motor and belts.jpeg (file) |  |
1.21 MB | Dankulla | The motor and two sets of pulleys in the South Bend metal lathe powertrain | 1 |
| 17:37, 7 April 2024 | Electro-melts.jpeg (file) |  |
2.51 MB | Tess | Kerr 1 kg and Riogrande 3 kg Electro-melt Furnaces | 1 |
| 14:19, 5 April 2024 | TM300.pdf (file) | |
20.64 MB | AlanKilian | 1 | |
| 14:16, 5 April 2024 | TM-300 OnlineManual Win EN V04.pdf (file) | |
20.64 MB | AlanKilian | 1 | |
| 14:15, 5 April 2024 | CanonPrinterScanner.png (file) |  |
64 KB | AlanKilian | Design lab Canon printer and Scanner | 1 |
