New pages
From Artisans Asylum Wiki
- 12:20, 20 May 2024 HICOLO FAB 660 powder gun (hist | edit) [943 bytes] Jfbredt (talk | contribs) (Created page with "Category:Tools Link to: Metal Shop main page Link to: Powder Coating page {{ToolBox |tool_title = FAB-660 powder-coating system |tool_subtitle = HICOLO Gun |image = HICOLO_powder_coating_system.png |caption = The larger of the two systems |make = |model = |serial = |manufacturer_specs = |manual...")
- 12:15, 20 May 2024 Eastwood Powder Gun (hist | edit) [2,947 bytes] Jfbredt (talk | contribs) (Created page with "Category:Tools Link to: Metal Shop main page Link to: Powder Coating page {{ToolBox |tool_title = Eastwood dual-voltage gun |tool_subtitle = Eastwood Gun |image = Eastwood_powder_coating_gun.png |caption = The smaller of the two systems |make = |model = |serial = |manufacturer_specs = |manual...")
- 18:08, 14 May 2024 Board of directors (hist | edit) [42 bytes] Dankulla (talk | contribs) (add a redirection for board of directors) Tags: New redirect Visual edit
- 18:07, 14 May 2024 Board (hist | edit) [42 bytes] Dankulla (talk | contribs) (add a redirection for board of directors) Tags: New redirect Visual edit
- 14:16, 11 May 2024 Bylaws (hist | edit) [325 bytes] Dankulla (talk | contribs) (added bylaws page) Tag: Visual edit
- 22:42, 2 May 2024 Machine Shop Material Safety Data Sheet (MSDS) (hist | edit) [16,437 bytes] Paulperry (talk | contribs) (Created page with "a") Tag: Visual edit originally created as "Material Safety Data Sheet (MSDS)"
- 00:09, 2 May 2024 LKB (hist | edit) [2,746 bytes] Jfbredt (talk | contribs) (Created page with "Category:OSERB Link to: Category:OSERB =Lousy Kiddie Brush Exercise= This exercise follows the Betty Edwards thesis by giving the left brain a task that it will refuse to do, allowing the right brain to take over the work. '''Plan:''' This exercise occupies two ten-minute poses where the first of the poses also qualifies as ordinary practice drawing from the model. The model is placed in a relatively horizontal pose and the students are asked to draw every...")
- 21:54, 1 May 2024 RB Warmups (hist | edit) [3,085 bytes] Jfbredt (talk | contribs) (Created page with "[Category:OSERB]] Link to: Category:OSERB Some warmup exercises are recommended in this [https://www.youtube.com/watch?v=s6TUkkZoEDw Youtube video] and are summarized below:")
- 18:28, 1 May 2024 WOB (hist | edit) [11,396 bytes] Jfbredt (talk | contribs) (Created page with " Link to: Category:OSERB =White-on-Black drawing exercise= '''Background:''' This is a texbook exercise for drawing classes, taught to me by Borka (Barbara Sitar.) It has become my flagship exercise for right-hemisphere training. It's a full hour and I do it most class sessions, with a planned monologue to set the mood. '''Intent:''' To enlist the students' right hemispheres in the drawing process. In the context of the Betty Edwards program, the student...")
- 13:19, 1 May 2024 Copy pages from the old wiki (hist | edit) [2,555 bytes] Acharlwood (talk | contribs) (Brief instructions on how to copy pages from the old wiki to the new one) Tag: Visual edit
- 11:22, 28 April 2024 Artisans Asylum Electrical Safety (hist | edit) [7,530 bytes] Dickr (talk | contribs) (Added electrical safety page, per Health & Safety Committee.) Tag: Visual edit
- 00:27, 28 April 2024 Computer and Network Terms of Use (hist | edit) [2,439 bytes] Dickr (talk | contribs) (Created new page with IT terms of use. Will link from elsewhere.) Tag: Visual edit
- 23:23, 23 April 2024 Cyclone Sand Blaster (hist | edit) [13,649 bytes] Jfbredt (talk | contribs) (Created page with "Category:Tools Link to: Metal Shop main page {{ToolBox |tool_title = Sand Blaster |tool_subtitle = Cyclone Manufacturing |image = Metal_shop_sandblaster_action_shot.png |caption = Blasting |make = Cyclone Manufacturing |model = DW-7335 |serial = Unknown |manufacturer_specs = |manual = |location = Blast Room in the M...")
- 16:59, 11 April 2024 Wiki Information Architecture (hist | edit) [7,861 bytes] Acharlwood (talk | contribs) (Describing the information architecture of this wiki) Tag: Visual edit
- 15:04, 11 April 2024 Content Moderation (hist | edit) [1,779 bytes] Acharlwood (talk | contribs) (Added wiki content moderation policy) Tag: Visual edit
- 20:05, 2 April 2024 CanonLargeFormatScanner (hist | edit) [1,734 bytes] AlanKilian (talk | contribs) (Created page with "{{ToolBox |tool_title = |tool_subtitle = |image = |caption = |make = Canon |model = |serial = N/A |manufacturer_specs = |manual = |location = Digital Design Studio |rubric = |training = |testing = |restrictions = |tool_categories = }}")
- 19:32, 2 April 2024 Intro to the metal lathe (hist | edit) [7,698 bytes] Dankulla (talk | contribs) (add an introduction paragraph) Tag: Visual edit
- 13:33, 27 March 2024 3D Printer Markforged Mark 2 (hist | edit) [1,309 bytes] Jfbredt (talk | contribs) (Created page with "Category:Tools Link to: Digifab Shop main page Category:3D Printers - Extrusion {{ToolBox |tool_title = Markforged Mark 2 |tool_subtitle = 3D Printer (FDM) |image = MarkforgedM2.jpg |caption = The Markforged M2 3D printer |make = Markforged |model = Mark 2 |serial = Unknown |manufacturer_specs = |manual = [https://drive.goog...")
- 13:27, 27 March 2024 3D Printer Prusa MK3 (hist | edit) [2,666 bytes] Jfbredt (talk | contribs) (Created page with "Category:Tools Link to: Digifab Shop main page Category:3D Printers - Extrusion {{ToolBox |tool_title = Prusa MK3 |tool_subtitle = 3D Printer (FDM) |image = Prusa.png |caption = The Prusa MK3 3D printer |make = Josef Prusa |model = MK3 |serial = Unknown |manufacturer_specs = |manual = [https://drive.google.com/file/d/1FSUtdL...")
- 10:45, 27 March 2024 3D Printer anyKubic Kobra (hist | edit) [1,188 bytes] Jfbredt (talk | contribs) (Created page with "Category:Tools Link to: Digifab Shop main page Category:3D Printers - Extrusion {{ToolBox |tool_title = Kobra |tool_subtitle = 3D Printer (FDM) |image = anyKubicKobra.jpg |caption = The anyCubic Kobra 3D Printer |make = anyCubic |model = Kobra |serial = Unknown |manufacturer_specs = |manual = [https://drive.google.com/file/d...")
- 10:33, 27 March 2024 3D Printer Creality Ender Cr-30 (hist | edit) [1,582 bytes] Jfbredt (talk | contribs) (Created page with "Category:Tools Link to: Digifab Shop main page Category:3D Printers - Extrusion {{ToolBox |tool_title = Ender CR-30 |tool_subtitle = 3D Printer (FDM) |image = CrealityEnderCR-30.jpg |caption = The Creality Ender CR-30 3D Printer |make = Creality |model = Ender CR-30 |serial = Unknown |manufacturer_specs = |manual = [https://...")
- 10:27, 27 March 2024 3D Printer Ender 3S1 (hist | edit) [1,209 bytes] Jfbredt (talk | contribs) (Created page with "Category:Tools Link to: Digifab Shop main page Category:3D Printers - Extrusion {{ToolBox |tool_title = Ender 3S1 |tool_subtitle = 3D Printer (FDM) |image = Ender3S1-2.jpg |caption = The Ender3S1 3D Printer |make = Creality |model = Ender3S1 |serial = Unknown |manufacturer_specs = |manual = [https://drive.google.com/file/d/1...")
- 10:18, 27 March 2024 3D Printer LulzBot Taz6 (hist | edit) [1,336 bytes] Jfbredt (talk | contribs) (Created page with "Category:Tools Link to: Digifab Shop main page Category:3D Printers - Extrusion {{ToolBox |tool_title = LulzBot Taz6 |tool_subtitle = 3D Printer (FDM) |image = LulzBotTaz6.jpg |caption = The LulzBot 3D Printer |make = LulzBot |model = Taz6 |serial = Unknown |manufacturer_specs = |manual = [https://wiki.bambulab.com/en/p1/man...")
- 10:14, 27 March 2024 3D Printer Bambu P1P (hist | edit) [1,220 bytes] Jfbredt (talk | contribs) (Created page with "Category:Tools Link to: Digifab Shop main page Category:3D Printers - Extrusion {{ToolBox |tool_title = Bambu P1P |tool_subtitle = 3D Printer (FDM) |image = BambuLabsP1P.jpg |caption = The BambuLabs P1P Printer |make = BambuLabs |model = P1P |serial = Unknown |manufacturer_specs = |manual = [https://wiki.artisansasylum.com/i...")
- 18:10, 26 March 2024 BLUE (hist | edit) [4 bytes] Jfbredt (talk | contribs) (Created page with "BLUE")
- 21:36, 22 March 2024 Our History (hist | edit) [1,312 bytes] Paulperry (talk | contribs) (recovered from the old wiki.) Tag: Visual edit
- 21:25, 22 March 2024 Waste disposal (hist | edit) [2,130 bytes] Paulperry (talk | contribs) (start of a waste disposal policy) Tag: Visual edit
- 15:27, 21 March 2024 Community Values (hist | edit) [3,862 bytes] Treethan (talk | contribs) (creation) originally created as "Values"
- 21:11, 20 March 2024 Dariush Nejad (hist | edit) [54 bytes] Puppy (talk | contribs) (Created page with "teset") Tag: Visual edit
- 18:28, 19 March 2024 Michael Mittelman (hist | edit) [679 bytes] Dankulla (talk | contribs) (add Mike MIttelman) Tag: Visual edit
- 18:18, 19 March 2024 Joe Wight (hist | edit) [19 bytes] Dankulla (talk | contribs) (add redirect for puppy) Tags: New redirect Visual edit
- 18:17, 19 March 2024 Scraps SparcS (hist | edit) [27 bytes] Dankulla (talk | contribs) (add redirect for scraps) Tags: New redirect Visual edit
- 18:02, 19 March 2024 Alice Stein (hist | edit) [983 bytes] Dankulla (talk | contribs) (Add Alice Stein) Tag: Visual edit
- 18:00, 19 March 2024 Geoff Chasin (hist | edit) [978 bytes] Dankulla (talk | contribs) (Add Geoff Chasin) Tag: Visual edit
- 17:58, 19 March 2024 Morgan Pierson (hist | edit) [939 bytes] Dankulla (talk | contribs) (Add Morgan Pierson) Tag: Visual edit
- 17:56, 19 March 2024 Scraps Sparcs (hist | edit) [923 bytes] Dankulla (talk | contribs) (Add Scraps sparcS) Tag: Visual edit
- 17:54, 19 March 2024 Nick Bernier (hist | edit) [923 bytes] Dankulla (talk | contribs) (Add Nick Bernier) Tag: Visual edit
- 17:51, 19 March 2024 Lewis Bryant (hist | edit) [1,370 bytes] Dankulla (talk | contribs) (Add Lewis Bryant) Tag: Visual edit
- 17:48, 19 March 2024 Puppy (hist | edit) [977 bytes] Dankulla (talk | contribs) (Add Puppy) Tag: Visual edit
- 17:45, 19 March 2024 Tom Cole (hist | edit) [976 bytes] Dankulla (talk | contribs) (Add Tom Cole) Tag: Visual edit
- 17:43, 19 March 2024 Peter Fearey (hist | edit) [983 bytes] Dankulla (talk | contribs) (Add Peter Fearey) Tag: Visual edit
- 17:41, 19 March 2024 Rosa Weinberg (hist | edit) [786 bytes] Dankulla (talk | contribs) (add Rosa Weinberg) Tag: Visual edit
- 17:38, 19 March 2024 Allison Waters Doherty (hist | edit) [1,212 bytes] Dankulla (talk | contribs) (Add Allison Doherty) Tag: Visual edit
- 21:59, 18 March 2024 Vinyl cutter (hist | edit) [337 bytes] NickA (talk | contribs) (Created page with "{{ToolBox|tool_title=US Cutter Vinyl Cutter|image=|caption=|make=US Cutter|model=n/a|serial=Unknown|manufacturer_specs=n/a|manual=|location=Digifab Shop|rubric=n/a|training=|testing=[https://www.artisansasylum.com/tool-testing Tool testing]|restrictions=green|tool_categories=Category:Vinyl Cutter}} == Additional specifications ==")
- 19:44, 18 March 2024 August 17, 2021 (hist | edit) [4,549 bytes] Atwalter (talk | contribs) (Add board meeting notes for Aug 17, 2021 based on notes archived from BookStack)
- 19:41, 18 March 2024 Ariel Matisse (hist | edit) [670 bytes] Dankulla (talk | contribs) (Add Ariel Matisse page) Tag: Visual edit
- 19:38, 18 March 2024 September 14, 2021 (hist | edit) [3,417 bytes] Atwalter (talk | contribs) (Add board meeting notes for Sept 14, 2021 based on notes archived from BookStack)
- 19:34, 18 March 2024 November 9, 2021 (hist | edit) [6,761 bytes] Atwalter (talk | contribs) (Add board meeting notes for Nov 9, 2021 based on notes archived from BookStack)
- 19:30, 18 March 2024 Dan Kulla (hist | edit) [799 bytes] Dankulla (talk | contribs) (Created the dan kulla pag) Tag: Visual edit
- 17:16, 15 March 2024 Do-All Vertical Bandsaw (hist | edit) [4,660 bytes] Jfbredt (talk | contribs) (Created page with "Category:ToolsCategory:Vertical Band Saws -- Metal Cutting Link to: Machine Shop Main Page {{EyeWarning}} {{ToolBox |tool_title = Do-All Vertical Band Saw |tool_subtitle = Do-All 15-inch |image = Band_Saw_Palmgren.png |caption = The Do-All band saw in the Machine Shop |make = Do-All |model = 2013-10 |serial = |manufacturer_specs =...")
- 17:08, 15 March 2024 Palmgren 15-inch Vertical Bandsaw (hist | edit) [3,636 bytes] Jfbredt (talk | contribs) (Created page with "Category:ToolsCategory:Lathes -- Metal Link to: Machine Shop Main Page {{EyeWarning}} {{ToolBox |tool_title = Palmgren Vertical Band Saw |tool_subtitle = Palmgren 15-inch |image = Band_Saw_Palmgren.png |caption = The Palmgren band saw in the MAchine Shop |make = Palmgren |model = 15-inch, 7 speed |serial = |manufacturer_specs = |manual...")
- 11:56, 15 March 2024 -) (hist | edit) [205 bytes] Jfbredt (talk | contribs) (Created page with " smile")
- 23:07, 14 March 2024 Class Figure Drawing Current Registration (hist | edit) [115 bytes] Jfbredt (talk | contribs) (Created page with "Link to: EventBrite page for the next session of [https://www.eventbrite.com/e/figure-drawing-tickets-774448224487?aff=oddtdtcreator Figure Drawing]")
- 23:02, 14 March 2024 Independent Class: Figure Drawing (hist | edit) [3,840 bytes] Jfbredt (talk | contribs) (Created page with " {| class="infobox" cellspacing="5" style="width: 22em; text-align: left; font-size: 100%; line-height: 1.5em;" ! colspan="2" class="infobox-image" | 250px|Sarah Miller model pic |- | colspan="2" | Life drawing from a model |- |}")
- 21:59, 14 March 2024 LINK ME (hist | edit) [114 bytes] Jfbredt (talk | contribs) (Created page with "content")
- 15:49, 14 March 2024 Enable the Visual Editor (hist | edit) [824 bytes] Acharlwood (talk | contribs) (Instructions on how to enable the visual editor) Tag: Visual edit
- 14:16, 14 March 2024 January 11, 2022 (hist | edit) [5,659 bytes] Puppy (talk | contribs) (Created page with "Artisan’s Asylum, Inc. Minutes of a Special Meeting of the Board January 11, 2022 Attendance Board Directors in Attendance: 1. Thomas Cole 2. Ariel Matisse 3. Nettrice Gaskins 4. Scott N. Miller 5. Morgan Pierson 6. Romaine Waite 7. Scott Harris 8. Kat Nakaji 9. Damien Dong 10. Ramesh Advani Board Directors Absent: 1. Ebbe Dahlor 2. Oye Ajewole Non-Directors in Attendance: 1. Lars Hasselblad Torres, Executive Director/CEO 2....") Tag: Visual edit
- 14:15, 14 March 2024 March 24, 2022 (hist | edit) [1,639 bytes] Puppy (talk | contribs) (Created page with "Artisan’s Asylum, Inc. Minutes of the Meeting of the Board of Directors May 24, 2022 at 18:00 EDT Attendance Board Directors in Attendance: 1. Ariel Matisse (co-Chair) 2. Thomas Cole (co-Chair) 3. Nettrice Gaskins 4. Scott Harris 5. Kat Nakaji 6. Damien Dong 7. Morgan Pierson 8. Ebbe Dahlor 9. Ramesh Advani 10. Preeti Tadikonda 11. Romaine Waite 12. Scott N. Miller Board Directors Absent: 1. Oye Ajewole A scheduled special meeting...") Tag: Visual edit
- 14:12, 14 March 2024 May 10, 2022 (hist | edit) [2,956 bytes] Puppy (talk | contribs) (Created page with "Artisan’s Asylum, Inc. Minutes of the Meeting of the Board of Directors May 10, 2022 at 18:00 EDT Attendance Board Directors in Attendance: 1. Ariel Matisse (co-Chair) 2. Thomas Cole (co-Chair) 3. Nettrice Gaskins (via Zoom) 4. Scott Harris (via Zoom) 5. Kat Nakaji 6. Damien Dong 7. Morgan Pierson 8. Oye Ajewole 9. Ebbe Dahlor 10. Ramesh Advani 11. Preeti Tadikonda 12. Scott N. Miller (via Zoom) Board Directors Absent: 1. Romaine Wai...") Tag: Visual edit
- 14:12, 14 March 2024 March 8, 2022 (hist | edit) [2,577 bytes] Puppy (talk | contribs) (Created page with "Artisan’s Asylum, Inc. Minutes of the Meeting of the Board of Directors March 8, 2022 at 18:00 ET Attendance Board Directors in Attendance: 1. Ariel Matisse (co-Chair) 2. Thomas Cole (co-Chair) 3. Nettrice Gaskins 4. Scott Harris 5. Kat Nakaji 6. Damien Dong 7. Morgan Pierson 8. Romaine Waite 9. Oye Ajewole 10. Ebbe Dahlor 11. Ramesh Advani 12. Preeti Tadikonda 13. Scott N. Miller Board Directors Absent: ● None Non-Director...") Tag: Visual edit
- 14:01, 14 March 2024 May 9, 2023 (hist | edit) [4,962 bytes] Puppy (talk | contribs) (Created page with "Minutes of a Meeting of the Board May 9, 2023 Attendance Board Directors in Attendance: # Tom Cole # Ramesh Advani # Damien Dong # Scott Harris # Kat Nakaji # Morgan Pierson # Peter Fearey # Ariel Matisse # Romaine Waite # Preeti Tadikonda # Geoff Chasin Board Directors Absent: # Allison Doherty # Oye Ajewole Non-Directors in Attendance: # Antonio Viva, Executive Director # Scott Seger, McCarter & English, LLP, pro bono counsel A special meeting of the Board...") Tag: Visual edit
- 14:00, 14 March 2024 June 27, 2023 (hist | edit) [4,953 bytes] Puppy (talk | contribs) (Created page with "Minutes of a Special Meeting of the Board June 27, 2023 Attendance Board Directors in Attendance: # Tom Cole # Ramesh Advani # Damien Dong # Scott Harris # Kat Nakaji # Morgan Pierson # Allison Doherty # Peter Fearey # Ariel Matisse # Romaine Waite # Preeti Tadikonda # Geoff Chasin # Scraps Board Directors Absent: # Joe Wight # Oye Ajewole Non-Directors in Attendance: # Antonio Viva, Executive Director # Dan Kulla, Member Liaison # Scott Seger, McCarter & Engl...") Tag: Visual edit
- 14:00, 14 March 2024 July 11, 2023 (hist | edit) [4,273 bytes] Puppy (talk | contribs) (Created page with "Minutes of a Special Meeting of the Board July 11, 2023 Attendance Board Directors in Attendance: # Tom Cole # Ramesh Advani # Scott Harris # Kat Nakaji # Morgan Pierson # Allison Doherty # Peter Fearey # Ariel Matisse # Romaine Waite # Preeti Tadikonda # Geoff Chasin # Scraps # Puppy Board Directors Absent: # Oye Ajewole Non-Directors in Attendance: # Damien Dong, Interim Executive Director # Antonio Viva, Consultant # Dan Kulla, Member Liaison # Scott Seger,...") Tag: Visual edit
- 23:51, 13 March 2024 September 12, 2023 (hist | edit) [3,583 bytes] Puppy (talk | contribs) (Created page with "Minutes of a Special Meeting of the Board September 12, 2023 Attendance Board Directors in Attendance: # Tom Cole # Ramesh Advani # Scott Harris # Kat Nakaji # Morgan Pierson # Allison Doherty # Peter Fearey # Ariel Matisse # Romaine Waite # Preeti Tadikonda # Geoff Chasin # Scraps # Puppy # Oye Ajewole Board Directors Absent: # Nick Bernier Non-Directors in Attendance: # Antonio Viva, Executive Director # Damien Dong, Interim # Dan Kulla, Member Liaison # Da...") Tag: Visual edit
- 23:50, 13 March 2024 January 18, 2024 (hist | edit) [3,245 bytes] Puppy (talk | contribs) (Created page with "Minutes of a Special Meeting of the Board January 18, 2024 Attendance Board Directors in Attendance: # Nick Bernier # Lewis Bryant # Geoff Chasin # Thomas Cole # Allison Doherty # Peter Fearey # Ariel Matisse # Michael Mittleman # Morgan Pierson # Puppy # Scraps sparcS # Alice Stein Board Directors Absent: # Netia McCray # Arti Mehta # Dariush Nejad # Rosa Weinberg Non-Directors in Attendance: # Dan Kulla A special meeting of the Board of Directors (the “Bo...") Tag: Visual edit
- 23:48, 13 March 2024 January 10, 2024 (hist | edit) [8,483 bytes] Puppy (talk | contribs) (Created page with "Minutes of a Regularly-Scheduled Meeting of the Board January 10, 2024 Attendance Board Directors in Attendance: # Thomas Cole # Ariel Matisse # Morgan Pierson # Geoff Chasin # Nick Bernier # Scraps sparcS # Michael Mittleman # Peter Fearey # Dariush Nejad # Alice Stein # Allison Doherty # Puppy # Rosa Weinberg Board Directors Absent: # Arti Mehta # Lewis Bryant # Netia McCray Non-Directors in Attendance: # Damien Paul Dong # Dan Kulla A regularly-scheduled m...") Tag: Visual edit
- 20:01, 13 March 2024 November 8, 2022 (hist | edit) [7,090 bytes] Puppy (talk | contribs) (Created page with "Attendance Board Directors in Attendance: # Thomas Cole # Ariel Matisse # Scott Harris # Ramesh Advani # Damien Dong # Scott Miller # Morgan Pierson # Nettrice Gaskins # Oye Ajewole # Kat Nakaji # Romaine Waite Board Directors Absent: # Ebbe Dahlor # Preeti Tadikonda Non-Directors in Attendance: # Antonio Viva, Executive Director # Scott Seger, McCarter & English, LLP, pro bono counsel A regularly-scheduled meeting of the Board of Directors (the “Board”) of...") Tag: Visual edit
- 19:59, 13 March 2024 June 28, 2022 (hist | edit) [2,928 bytes] Puppy (talk | contribs) (Created page with "Special Meeting of the Board June 28, 2022 Attendance Board Directors in Attendance: # 1. Thomas Cole # 2. Ariel Matisse # 3. Morgan Pierson # 4. Romaine Waite # 5. Scott Harris # 6. Kat Nakaji # 7. Ramesh Advani # 8. Preeti Tadikonda # 9. Oye Ajewole # 10. Nettrice Gaskins Board Directors Absent: # 1. Ebbe Dahlor # 2. Damien Dong # 3. Scott N. Miller Non-Directors in Attendance: # 1. Sandra Brown, Smith, Sullivan & Brown, auditor # 2. Beth Blanney, BBA Bookkeepi...") Tag: Visual edit
- 19:39, 13 March 2024 July 12, 2022 (hist | edit) [5,715 bytes] Puppy (talk | contribs) (Created page with "==== Board Directors in Attendance: ==== # Thomas Cole # Ariel Matisse # Romaine Waite # Scott Harris # Ramesh Advani # Preeti Tadikonda # Oye Ajewole # Damien Dong # Scott Miller ==== Board Directors Absent: ==== # Ebbe Dahlor # Nettrice Gaskins # Kat Nakaji # Morgan Pierson ==== Non-Directors in Attendance: ==== # Antonio Viva, Executive Director # Scott Seger, McCarter & English, LLP, pro bono counsel # Ted Grannatt, McCarter & English, LLP, pro bo...") Tag: Visual edit
- 10:40, 13 March 2024 Tormach 15L CNC Slant Lathe (hist | edit) [1,738 bytes] Jfbredt (talk | contribs) (Created page with "Category:ToolsCategory:Lathes -- Metal Link to: Machine Shop Main Page {{EyeWarning}} {{ToolBox |tool_title = Tormach 15L Slant-Pro |tool_subtitle = Tormach 15L |image = Lathe_Tormach.jpg |caption = One of the two CNC Slant-Pro lathes |make = Tormach |model = |serial = |manufacturer_specs = |manual = [https://drive.google.co...")
- 10:26, 13 March 2024 South Bend Manual Lathe (hist | edit) [7,016 bytes] Jfbredt (talk | contribs) (Created page with "Category:ToolsCategory:Lathes -- Metal Link to: Machine Shop Main Page {{EyeWarning}} {{ToolBox |tool_title = South Bend Lathe |tool_subtitle = South Bend Lathe |image = Lathe_South_Bend.jpg |caption = The South Bend manual bench lathe |make = South Bend |model = |serial = |manufacturer_specs = |manual = |location...")
- 10:19, 13 March 2024 Logan Manual Lathe (hist | edit) [10,438 bytes] Jfbredt (talk | contribs) (Created page with "Category:ToolsCategory:Milling Machines Link to: Machine Shop Main Page {{EyeWarning}} {{ToolBox |tool_title = Logan Lathe |tool_subtitle = Logan Lathe |image = Lathe_Logan.jpg |caption = The Logan manual bench lathe |make = Logan |model = |serial = |manufacturer_specs = |manual = |location = Machine Shop |rub...")
- 11:02, 12 March 2024 Bridgeport Manual Milling Machine (hist | edit) [2,210 bytes] Jfbredt (talk | contribs) (Created page with "Category:ToolsCategory:Milling Machines Link to: Machine Shop Main Page {{EyeWarning}} {{ToolBox |tool_title = Bridgeport Milling Machine |tool_subtitle = Bridgeport Milling Machine |image = Mill_Bridgeport_new.png |caption = The Bridgeport mill in the Asylum Machine Shop |make = Bridgeport |model = |serial = |manufacturer_specs = |manu...")
- 14:06, 10 March 2024 M3X CNC Milling Machine (hist | edit) [4,196 bytes] Jfbredt (talk | contribs) (Created page with "Category:Milling Machines Link to: Machine Shop Main Page {{EyeWarning}} {{ToolBox|tool_title=M3X Mill|image=Accupath Mill.jpeg|caption=M3X CNC Milling Machine|make=CNC Automation|model=M3X|location=Machine Shop|training=[https://www.artisansasylum.com/class-catalog Tool classes]|testing=[https://www.artisansasylum.com/tool-testing Tool testing]|restrictions=red |manual=[https://drive.google.com/file/d/19X5VF4ealndE2W9APdify8TXY6ilxQmM/...")
- 02:20, 10 March 2024 Circuit Hacking Night Projects (hist | edit) [1,110 bytes] TidyBoxedElectrons (talk | contribs) (Created page with "This page shows some of the Circuit Hacking Night projects and discussions that have happened in the past. The Circuit Hacking Night has been going on since (practically) the start of Artisans Asylum! == What is Circuit Hacking Night? == The Circuit Hacking description from Eventbrite: ''Drop by to see what electronics can do for you, learn to solder, get help fixing broken stuff, get help with your project, blinky LEDs, sensors, DMM/Multimeters, motors, sparks, Ardu...")
- 22:13, 7 March 2024 DaVinci CNC Mill (hist | edit) [666 bytes] Paulperry (talk | contribs) (Created page with "{{ToolBox|tool_title=DaVinci CNC Mill|image=DaVinci_CNC_Mill.jpeg|caption=DaVinci CNC Mill|make=Techno|model=DaVinci CNC Mill|serial=Unknown|manufacturer_specs=[http://support.technocnc.com/Stepper_DaVinci.htm DaVinci Specs]|location=Machine Shop|training=[https://www.artisansasylum.com/class-catalog Tool classes]|testing=[https://www.artisansasylum.com/tool-testing Tool testing]|restrictions=red|tool_categories=Category:Milling_Machines}}") Tag: Visual edit
- 14:53, 7 March 2024 New Member Guide (hist | edit) [7,172 bytes] Paulperry (talk | contribs) (Created blank page) Tag: Visual edit
- 14:43, 7 March 2024 Shop Safety and Etiquette (hist | edit) [5,046 bytes] Paulperry (talk | contribs) (Created blank page) Tag: Visual edit
- 03:43, 7 March 2024 HSMworks use for CNC Lathe (hist | edit) [16,317 bytes] Paulperry (talk | contribs) (formatting changes) Tag: Visual edit
- 17:06, 6 March 2024 Acer Dynamic 1340G Manual Lathe (hist | edit) [3,760 bytes] Paulperry (talk | contribs) (Created page with "{{ToolBox|tool_title=Acer Dynamic 1340G Manual Lathe|image=ACER_Lathe.jpg|caption=Acer Dynamic Lathe|make=Acer|model=Dynamic 1340G|serial=Unknown|manufacturer_specs=https://aceronline.net/productDetail.php?id=290|location=Machine Shop|training=[https://www.artisansasylum.com/class-catalog Tool classes]|testing=[https://www.artisansasylum.com/tool-testing Tool testing]|restrictions=red|tool_categories=Category:Lathes_--_Metal}}") Tag: Visual edit
- 00:04, 6 March 2024 Bridgeport Series 1 Standard Knee Mill (hist | edit) [4,338 bytes] Paulperry (talk | contribs) (Created page with "Category:ToolsCategory:Milling Machines Link to: Machine Shop Main Page {{EyeWarning}}")
- 22:57, 5 March 2024 Millport SmartLathez 1740 CNC Lathe (hist | edit) [1,367 bytes] Paulperry (talk | contribs) (Created page with "Category:Category:Lathes_--_Metal Link to: Machine Shop Main Page {{EyeWarning}}")
- 21:09, 2 March 2024 Enco Manual Milling Machine (hist | edit) [1,919 bytes] Jfbredt (talk | contribs) (Created page with "Category:ToolsCategory:Milling Machines Link to: Machine Shop Main Page {{ToolBox |tool_title = Enco Manual Mill |tool_subtitle = Enco Milling Machine |image = Mill_Enco.png |caption = The ENCO mill in the Asylum Machine Shop |make = Enco |model = |serial = |manufacturer_specs = |manual = [https://drive.google.com/file/d/1QCXu...")
- 20:39, 2 March 2024 Sharp Manual Milling Machine (hist | edit) [2,258 bytes] Jfbredt (talk | contribs) (Created page with "{{ToolBox |tool_title = Sharp Milling Machines |tool_subtitle = Sharp Manual Mills |image = Mill_Sharp_Clack.png |caption = One of the two Sharp mills in the Machine Shop |make = Sharp |model = |serial = |manufacturer_specs = |manual = [https://drive.google.com/file/d/1tYD_9kQ6xWI9PI96eulNTutq1rXl5FOP/view?usp=drive_link Operating Manual] |location...")
- 22:11, 28 February 2024 Sources For Metals (hist | edit) [3,411 bytes] Regis (talk | contribs) (Created page with "= Sources For Metals = == Local: == * Atlas Metals, 475 Columbia Street, Somerville, MA 02143. (617) 666-8440. * [Metal Supermarkets https://www.metalsupermarkets.com/location/boston-north/] in Woburn. You can order online, or show up and buy there. * [Admiral Metals https://www.admiralmetals.com/], 11 Forbes Rd, Woburn, 781/932-0482 You can buy just about any metal except mild steel (aka "normal" steel; they do stainless though), of any type (tube, bar,...")
- 21:21, 28 February 2024 Allowed Materials For Shopbot (hist | edit) [979 bytes] Regis (talk | contribs) (Created page with "Category:CNC_Gantry_Routers_--_ShopBotCategory:Allowed_Materials NB: the current version of this list is directly imported from the old wiki. It needs to be vetted with the current Shopbot leads. = Approved Materials for ShopBot = == Woods == * Plywood * Hardwood * MDF * No reclaimed wood, painted wood, wood with nails, exotic wood == Plastics == * ABS * Acrylic * Polycarbonate * PETG * No PVC == Composites == * Solid-Su...")
- 21:30, 27 February 2024 Update your billing information (hist | edit) [315 bytes] Acharlwood (talk | contribs) (Added stub entry for task page on how to update your billing information) Tag: Visual edit
- 21:28, 27 February 2024 Update your membership plan (hist | edit) [304 bytes] Acharlwood (talk | contribs) (Added stub entry for task page on how to update your membership plan) Tag: Visual edit
- 13:40, 27 February 2024 Machine Shop Rules (hist | edit) [1,079 bytes] Paulperry (talk | contribs) (Created page with "== Artisan's Asylum Machine Shop Rules == 1. Safety googles are required at all times. 2. Sturdy, closed-toed shoes and long pants required. 3. Every powered tool in this shop requires testing or training from a supervisor. 4. No gloves of any kind. 5. No wood. Plastics OK! 6. Be awesome. Clean up after yourself. Leave no chips, no oil, no tools. 7. Report all broken equipment to maintenance@, and tag with a Red Tag. 8. We are a volunteer-run shop: all cleaning a...")
- 18:07, 24 February 2024 Jet 36x12 Wood Lathe (hist | edit) [2,875 bytes] Jfbredt (talk | contribs) (Created page with "Category:ToolsCategory:Wood ShopCategory:Vertical Band Saws -- Wood Cutting {{ToolBox |tool_title = Jet 36x12 Wood Lathe |tool_subtitle = Jet Wood Lathe |image = Wood_lathe_in_action.jpg |caption = Jet Wood Lathe in action |make = Jet |model = JWL 1236 |serial = Various |manufacturer_specs = |manual = [https://drive.google.com/file/d/1H_1BjOvjZ...")
- 14:36, 23 February 2024 Powermatic PM1500 15-inch Band Saw (hist | edit) [906 bytes] Jfbredt (talk | contribs) (Created page with "Category:ToolsCategory:Wood ShopCategory:Vertical Band Saws -- Wood Cutting {{ToolBox |tool_title = Powermatic PM1500 Band Saw |tool_subtitle = Powermatic 1500 Band Saw |image = Band_saw_pm1500_nolabels.png |caption = Bullwinkle |make = Powermatic |model = PM1500 |serial = Unknown |manufacturer_specs = |manual = [https://drive.google.com/file/d...")
- 14:33, 23 February 2024 Powermatic PWBS-14 14-inch Band Saw (hist | edit) [943 bytes] Jfbredt (talk | contribs) (Created page with "Category:ToolsCategory:Wood ShopCategory:Vertical Band Saws -- Wood Cutting {{ToolBox |tool_title = 14-inch Band Saw |tool_subtitle = Powermatic PWBS-14 Band Saw |image = Band_saw_pwbs-14_nolabels.png |caption = Rocky |make = Powermatic |model = PWBS-14 |serial = Unknown |manufacturer_specs = |manual = [https://drive.google.com/file/d/1GUv_u3nb...")
- 13:32, 23 February 2024 PM1500 15-inch Band Saw (hist | edit) [0 bytes] Jfbredt (talk | contribs) (Created page with "Category:ToolsCategory:Wood ShopCategory Vertical Band Saws {{ToolBox |tool_title = Powermatic 1500 Band Saw |tool_subtitle = Powermatic 1500 Band Saw |image = Band_saw_pm1500_nolabels.png |caption = Bullwinkle |make = Powermatic |model = PM1500 |serial = Unknown |manufacturer_specs = |manual = [https://drive.google.com/file/d/1at6OsDZCI-1-I0M0Lae1Da0...")
- 16:20, 22 February 2024 Milwaukee 6480-20 Panel Saw (hist | edit) [8,307 bytes] Jfbredt (talk | contribs) (Created page with "Category:ToolsCategory:Wood Shop {{ToolBox |tool_title = Milwaukee Panel Saw |tool_subtitle = Milwaukee Panel Saw |image = Panel_Saw_Idle.jpg |caption = View of the panel saw carriage |make = Milwaukee |model = 6480-20 |serial = Unknown |manufacturer_specs = |manual = [https://drive.google.com/file/d/1QUKsuyhCJRGJdClQKkgeiCyn7fMZ37WV/view?usp=drive_link P...")
- 20:45, 21 February 2024 Sourcing metal (hist | edit) [7,071 bytes] Treethan (talk | contribs) (creation)