General Hydraulic Shop Press: Difference between revisions
From Artisans Asylum Wiki
No edit summary |
No edit summary |
||
| Line 24: | Line 24: | ||
A hydraulic jack mounted to a frame that translates the lifting force into pressure. Built around a Pittsburgh 20-ton bottle jack. Width: 18 inches. Also includes a jig for bending metal sheet. It has a compressed-air actuator built in but can also be operated manually. | A hydraulic jack mounted to a frame that translates the lifting force into pressure. Built around a Pittsburgh 20-ton bottle jack. Width: 18 inches. Also includes a jig for bending metal sheet. It has a compressed-air actuator built in but can also be operated manually. | ||
==Use For== | |||
Squashing things | |||
==Do Not Use For== | |||
Not squashing things | |||
=Bending Accessory= | =Bending Accessory= | ||
Revision as of 11:55, 14 June 2024
Link to: Machine Shop Main Page
| Hydraulic Shop Press | |
|---|---|
| General Info | |
| Make | General Hydraulic |
| Model | |
| Serial | |
| Specs | |
| Manual | Pittsburgh 20-ton Bottle Jack Manual |
| Asylum Info | |
| Location | Machine Shop |
| Rubric | N/A |
| Training | |
| Testing | Tool testing |
| Restrictions | green |
Description
A hydraulic jack mounted to a frame that translates the lifting force into pressure. Built around a Pittsburgh 20-ton bottle jack. Width: 18 inches. Also includes a jig for bending metal sheet. It has a compressed-air actuator built in but can also be operated manually.
Use For
Squashing things
Do Not Use For
Not squashing things
Bending Accessory
This accessory normally rests on the floor behind the press. Caution! Weight is about 60 lbs.
| |
|---|---|
| The bending jig for the 20-ton shop press |
