Palmgren 15-inch Vertical Bandsaw: Difference between revisions
From Artisans Asylum Wiki
No edit summary |
No edit summary |
||
| Line 23: | Line 23: | ||
==Safety== | ==Safety== | ||
{{EyeWarning}} | |||
==Personal== | |||
* '''Wear safety goggles.''' Eyeglasses are NOT safety goggles. | |||
{| class="infobox" cellspacing="0" style="width: 2em; text-align: left; font-size: 125%; line-height: 1.5em;" | |||
! colspan="2" class="infobox-image" | [[File:_flying_debris_hazard.png|120px| ]] | |||
|- | |||
| colspan="2" | | |||
|- | |||
|} | |||
* Wear '''closed-toe shoes.''' | |||
* '''Do not wear loose clothing''' or jewelry when operating the machine. Long hair must be tied back or covered. | |||
* Do not wear gloves. Gloves can be drawn into a cut by the moving blade. | |||
* Do not remove chips from the cutting area with bare hands. Use a chip brush. | |||
* Always keep a secure, stable stance. Avoid over-reaching. Clean up oil spills immediately and avoid slipping. Keep the work area clear of trip hazards. | |||
==Machine== | |||
* Always stay at the machine while it is running. | |||
* Do not operate the machine if any unusual or excessive heat, noise, smoke, or vibration occurs. | |||
* '''Make sure the blade has come to a complete stop''' before removing the workpiece from a partial cut. | |||
* Do not allow loose tools or piles of chips to accumulate on the machine. | |||
* Always use sharp blades that are in good condition. | |||
Revision as of 17:39, 15 March 2024
Link to: Machine Shop Main Page
 |
 |
Eye protection required! |
|---|---|---|
| Palmgren Vertical Band Saw | |
|---|---|
| General Info | |
| Make | Palmgren |
| Model | 15-inch, 7 speed |
| Serial | |
| Specs | |
| Manual | User Manual |
| Asylum Info | |
| Location | Machine Shop |
| Rubric | N/A |
| Training | |
| Testing | Tool testing |
| Restrictions | red |
See the Vertical Band Saws category for notes on using saws of this kind.
Safety
|
|
Eye protection required! |
|---|---|---|
Personal
- Wear safety goggles. Eyeglasses are NOT safety goggles.
| |
|---|---|
- Wear closed-toe shoes.
- Do not wear loose clothing or jewelry when operating the machine. Long hair must be tied back or covered.
- Do not wear gloves. Gloves can be drawn into a cut by the moving blade.
- Do not remove chips from the cutting area with bare hands. Use a chip brush.
- Always keep a secure, stable stance. Avoid over-reaching. Clean up oil spills immediately and avoid slipping. Keep the work area clear of trip hazards.
Machine
- Always stay at the machine while it is running.
- Do not operate the machine if any unusual or excessive heat, noise, smoke, or vibration occurs.
- Make sure the blade has come to a complete stop before removing the workpiece from a partial cut.
- Do not allow loose tools or piles of chips to accumulate on the machine.
- Always use sharp blades that are in good condition.
