Enco Manual Milling Machine: Difference between revisions
From Artisans Asylum Wiki
| Line 34: | Line 34: | ||
The spindle speed in adjusted manually with the crank on the right-hand face of the headstock. '''Only adjust the spindle speed when the spindle is turning!''' | The spindle speed in adjusted manually with the crank on the right-hand face of the headstock. '''Only adjust the spindle speed when the spindle is turning!''' | ||
==Manual Draw- | ==Manual Draw-Bar== | ||
This machine has manual tool-changing with a wrench. | This machine has manual tool-changing with a wrench. | ||
Revision as of 21:25, 3 March 2024
Link to: Machine Shop Main Page
| Enco Manual Mill | |
|---|---|
| General Info | |
| Make | Enco |
| Model | |
| Serial | |
| Specs | |
| Manual | User Manual |
| Asylum Info | |
| Location | Machine Shop |
| Rubric | N/A |
| Training | |
| Testing | Tool testing |
| Restrictions | red |
See the Milling Machines category for notes on using all 3-Axis Milling Machines
Digtal Read-Out
| |
|---|---|
| The digital read-out (DRO) on the Enco mill. |
This milling machine is strictly manual but it is equipped with a digital read-out that displays the position of the table in 0.001 inch increments. This eases the machining process greatly.
Speed Adjustment
The spindle speed in adjusted manually with the crank on the right-hand face of the headstock. Only adjust the spindle speed when the spindle is turning!
Manual Draw-Bar
This machine has manual tool-changing with a wrench.
