Sharp Manual Milling Machine: Difference between revisions
From Artisans Asylum Wiki
No edit summary |
No edit summary |
||
| Line 22: | Line 22: | ||
==Safety== | ==Safety== | ||
Link to: [https://wiki.artisansasylum.com/wiki/Category:Milling_Machines#Safety_Notes Safety notes on the Milling Machine Category page] | Link to: [https://wiki.artisansasylum.com/wiki/Category:Milling_Machines#Safety_Notes Safety notes on the Milling Machine Category page] | ||
==Description== | |||
There are two Sharp LMV manual units in service in the Machine Shop: | |||
'''"Click"''' has two motor drives on the two table movement axes. It has a manual drawbar for changing tools. | |||
'''"Clack"''' has non-functioning servo motors on the two horizontal axes, with cranks for manual control. This machine has an air-actuated drawbar in the spindle for tool changing. | |||
Revision as of 21:12, 4 March 2024
Link to: Machine Shop Main Page
 |
 |
Eye protection required! |
|---|---|---|
| Sharp Milling Machines | |
|---|---|
| General Info | |
| Make | Sharp |
| Model | |
| Serial | |
| Specs | |
| Manual | Operating Manual |
| Asylum Info | |
| Location | Machine Shop |
| Rubric | N/A |
| Training | |
| Testing | Tool testing |
| Restrictions | red |
See the Milling Machines category for notes on using all 3-Axis Milling Machines
Safety
Link to: Safety notes on the Milling Machine Category page
Description
There are two Sharp LMV manual units in service in the Machine Shop: "Click" has two motor drives on the two table movement axes. It has a manual drawbar for changing tools. "Clack" has non-functioning servo motors on the two horizontal axes, with cranks for manual control. This machine has an air-actuated drawbar in the spindle for tool changing.
