Drill Press Walker Turner: Difference between revisions
From Artisans Asylum Wiki
No edit summary |
No edit summary |
||
| Line 19: | Line 19: | ||
|tool_categories = [[:Category:Drill Presses|See the Drill Presses category for notes on using all Drill Presses]] | |tool_categories = [[:Category:Drill Presses|See the Drill Presses category for notes on using all Drill Presses]] | ||
}} | }} | ||
{{EyeWarning}} | |||
'''The aptly-named Walker-Turner''' is mounted on a circular wooden base. By setting up an oscillation between the machine and the floor, it is very easy to walk around the shop and turn in any direction. | '''The aptly-named Walker-Turner''' is mounted on a circular wooden base. By setting up an oscillation between the machine and the floor, it is very easy to walk around the shop and turn in any direction. | ||
{{Warning | text=Care should be taken when using this tool.}} | {{Warning | text=Care should be taken when using this tool.}} | ||
Latest revision as of 13:12, 15 March 2024
Link to: Machine Shop main page
| Walker-Turner Drill Press | |
|---|---|
| General Info | |
| Make | Walker-Turner |
| Model | Antique, ca. 1940's |
| Serial | Unknown |
| Specs | |
| Manual | None |
| Asylum Info | |
| Location | Machine Shop |
| Rubric | |
| Training | |
| Testing | |
| Restrictions | red |
See the Drill Presses category for notes on using all Drill Presses
 |
 |
Eye protection required! |
|---|---|---|
The aptly-named Walker-Turner is mounted on a circular wooden base. By setting up an oscillation between the machine and the floor, it is very easy to walk around the shop and turn in any direction.
|
Care should be taken when using this tool. |
|---|---|
