Antwerp Shop Air: Difference between revisions
From Artisans Asylum Wiki
| Line 20: | Line 20: | ||
=Description= | =Description= | ||
This is a screw-type air compressor that is sized for the whole building. Presently it is only connected to the [[:Category:Metal Shop | Metal Shop]] and the [[:Category:Machine Shop | Machine Shop]]. Branches in the Metal Shop supply feed the [[:Category:Plasma Shop | Plasma Shop]], [[Cyclone Sand Blaster | Sand Blaster]], [[:Category:Powder_Coating_Facility | Powder Coating Facility]]. Supply pressure is about 100 psi. It has an automatic desiccator between the compressor and accumulator. | This is a screw-type air compressor that is sized for the whole building. Presently it is only connected to the [[:Category:Metal Shop | Metal Shop]] and the [[:Category:Machine Shop | Machine Shop]]. Branches in the Metal Shop supply feed the [[:Category:Plasma Shop | Plasma Shop]], the [[Cyclone Sand Blaster | Sand Blaster]], and the [[:Category:Powder_Coating_Facility | Powder Coating Facility]]. Supply pressure is about 100 psi. It has an automatic desiccator between the compressor and accumulator. | ||
There is a copper manifold that spans the whole building, but it needs troubleshooting. Until this is done, connections are made ''ad-hoc'' and the compressor is only turned on when it is needed. | There is a copper manifold that spans the whole building, but it needs troubleshooting. Until this is done, connections are made ''ad-hoc'' and the compressor is only turned on when it is needed. | ||
Revision as of 12:26, 15 October 2024
| Kaiser Air Compressor | |
|---|---|
| General Info | |
| Make | Kaiser |
| Model | |
| Serial | |
| Specs | n/a |
| Manual | |
| Asylum Info | |
| Location | Antwerp East Entry |
| Rubric | n/a |
| Training | |
| Testing | |
| Restrictions | green |
Description
This is a screw-type air compressor that is sized for the whole building. Presently it is only connected to the Metal Shop and the Machine Shop. Branches in the Metal Shop supply feed the Plasma Shop, the Sand Blaster, and the Powder Coating Facility. Supply pressure is about 100 psi. It has an automatic desiccator between the compressor and accumulator.
There is a copper manifold that spans the whole building, but it needs troubleshooting. Until this is done, connections are made ad-hoc and the compressor is only turned on when it is needed.
