3DFabLight

Link to: Metal Shop main page

Link to: Metal Shop tool list

3D FabLight 3000 Watt metal cutting LASER
3D FabLight 3000 Watt metal cutting LASER
General Info
Make	3D FabLight
Model	3,000 Watt
Serial	{{{serial}}}
Specs	{{{manufacturer_specs}}}
Manual	{{{manual}}}
Asylum Info
Location	Metal Shop
Rubric	{{{rubric}}}
Training	{{{training}}}
Testing	{{{testing}}}
Restrictions	red

{{{tool_categories}}}

Description

VERY PRELIMINARY WIKI ENTRY.

THIS TOOL IS NOT READY FOR USE AT THIS TIME.

This tool uses a LASER to cut sheets of metal

Use for:

• Steel (CRS): 0.15" (3.8mm) 9ga
• Stainless steel: 0.125" 2.3mm 11ga
• Aluminum: 0.083" (2.11mm) 12ga
• Copper: 0.048" (1.22mm) 18ga

Do Not Use for:

• Any sheet metal exceeding max thickness

Hazard Analysis

• Materials can catch on fire while being cut.

• Cuts/ scrapes from sharp cut edges of work

Operation Notes

• ... TBD

Basic Operation Instructions

1.

Videos

FabCreator tutorial

(Recorded livestream) Build a flatpack grill