3DFabLight: Difference between revisions
From Artisans Asylum Wiki
AlanKilian (talk | contribs) Tag: 2017 source edit |
AlanKilian (talk | contribs) No edit summary Tag: 2017 source edit |
||
| Line 5: | Line 5: | ||
{{ToolBox | {{ToolBox | ||
|tool_title = 3D FabLight 3000 Watt | |tool_title = 3D FabLight 3000 Watt sheetmetal cutting LASER | ||
|tool_subtitle = 3D FabLight 3000 Watt | |tool_subtitle = 3D FabLight 3000 Watt sheetmetal cutting LASER | ||
|image = 3DFabLight.jpg | |image = 3DFabLight.jpg | ||
|caption = 3D FabLight 3000 Watt | |caption = 3D FabLight 3000 Watt sheetmetal cutting LASER | ||
|make = 3D FabLight | |make = 3D FabLight | ||
|manual = [https://maker-hub.georgefox.edu/w/images/5/51/FabLight_Operator_Manual_v4.3.pdf Manual] | |manual = [https://maker-hub.georgefox.edu/w/images/5/51/FabLight_Operator_Manual_v4.3.pdf Manual] | ||
Revision as of 14:26, 7 August 2026
Link to: Metal Shop main page
Link to: Metal Shop tool list
| 3D FabLight 3000 Watt sheetmetal cutting LASER | |
|---|---|
 | |
| General Info | |
| Make | 3D FabLight |
| Model | 3,000 Watt |
| Serial | {{{serial}}} |
| Specs | {{{manufacturer_specs}}} |
| Manual | Manual |
| Asylum Info | |
| Location | Metal Shop |
| Rubric | {{{rubric}}} |
| Training | {{{training}}} |
| Testing | {{{testing}}} |
| Restrictions | red |
{{{tool_categories}}}
Description
VERY PRELIMINARY WIKI ENTRY.
THIS TOOL IS NOT READY FOR USE AT THIS TIME.
This tool uses a LASER to cut sheets of metal
Use for:
- Steel (CRS): 0.15" (3.8mm) 9ga
- Stainless steel: 0.125" 2.3mm 11ga
- Aluminum: 0.083" (2.11mm) 12ga
- Copper: 0.048" (1.22mm) 18ga
Do Not Use for:
- Any sheet metal exceeding max thickness
- ANY NON METAL MATERIALS
Hazard Analysis
- Materials can catch on fire while being cut.
- Cuts/ scrapes from sharp cut edges of work
Operation Notes
- ... TBD
Basic Operation Instructions
1.
