Do-All Vertical Bandsaw: Difference between revisions
| Line 52: | Line 52: | ||
* Next the | * Next the operator checks the current blade speed. An indicator on the lower left side of the machine reads in feet per minute. | ||
This indicator only registers while the machine is running. | This indicator only registers while the machine is running. | ||
| Line 60: | Line 60: | ||
|- | |- | ||
| colspan="2" | Feet per minute. Note only the '''SLOW''' speed range is available. | | colspan="2" | Feet per minute. Note only the '''SLOW''' speed range is available. | ||
|- | |||
|} | |||
* To change the speed the operator must reach around the left side of the machine and find a crank down near the bottom. | |||
This crank must '''ONLY''' be turned when the machine is running. It uses a similar linkage to the spindle transmissions in a vertical milling machine. | |||
{| class="infobox" cellspacing="5" style="width: 12em; text-align: left; font-size: 100%; line-height: 1.5em;" | |||
! colspan="2" class="infobox-image" | [[File:Band_Saw_Do_All_speed_adjustment.png|200px| Do-all speed adjust]] | |||
|- | |||
| colspan="2" | The crank is almost invisible around the back of the machine. | |||
|- | |- | ||
|} | |} | ||
Revision as of 20:43, 16 March 2024
Link to: Machine Shop Main Page
 |
 |
Eye protection required! |
|---|---|---|
| Do-All Vertical Band Saw | |
|---|---|
| General Info | |
| Make | Do-All |
| Model | 2013-10 |
| Serial | |
| Specs | |
| Manual | Instruction Manual for a Similar Model |
| Asylum Info | |
| Location | Machine Shop |
| Rubric | N/A |
| Training | |
| Testing | Tool testing |
| Restrictions | red |
See the Vertical Band Saws category for notes on using saws of this kind.
Safety
Link to: Safety notes on the Metal-Cutting Vertical Band Saws category page
| |
|---|---|
| The Do-All is extravagantly decorated with reminders like this. |
Operation
This machine is largely self-documenting.
Speed Selection
The machine is usually set to cut mild steel, for other materials it may be necessary to change the blade speed.
- The first step is to find what speed is needed.
| |
|---|---|
| Blade sizes and speed settings are found with this tool bequeathed to us by our ancestors. |
Blade speed data are well-documented and may be found from a wide variety of sources. The Do-All has a mechanism on its side panel that is well worth examining. It shows how your great-grandparents did these things. Today devices like this are as rare as they are baffling.
- Next the operator checks the current blade speed. An indicator on the lower left side of the machine reads in feet per minute.
This indicator only registers while the machine is running.
| |
|---|---|
| Feet per minute. Note only the SLOW speed range is available. |
- To change the speed the operator must reach around the left side of the machine and find a crank down near the bottom.
This crank must ONLY be turned when the machine is running. It uses a similar linkage to the spindle transmissions in a vertical milling machine.
| |
|---|---|
| The crank is almost invisible around the back of the machine. |
