Category:Powder Coating Facility: Difference between revisions
No edit summary |
No edit summary |
||
| Line 29: | Line 29: | ||
Located in a room on the southern wall of the Metal Shop, between the sand-blasting room and the CNC plasma cutter. An 8' x 8' spray booth with an unvented filter blower. This facility is sized to accommodate bicycle frames. A rolling rack fits into a 4'x4'x8' box oven. Two guns are available, and many jars of colored paints are present in the shop. | Located in a room on the southern wall of the Metal Shop, between the sand-blasting room and the CNC plasma cutter. An 8' x 8' spray booth with an unvented filter blower. This facility is sized to accommodate bicycle frames. A rolling rack fits into a 4'x4'x8' box oven. Two guns are available, and many jars of colored paints are present in the shop. | ||
The process uses dry powdered paint that is applied with a pneumatic gun that includes a high-voltage electrode. As the powder passes by the electrode it becomes electrically charged. The metallic workpiece is grounded and so it attracts the charged paint particles. After coating, workpieces are baked in a convection oven to fuse the paint. | |||
Revision as of 22:35, 19 May 2024
Link to: Metal Shop main page
| Powder Coating | |
|---|---|
| General Info | |
| Make | |
| Model | |
| Serial | Unknown |
| Specs | |
| Manual | link= Manual for a similar model |
| Asylum Info | |
| Location | Metal Shop |
| Rubric | |
| Training | Tool classes |
| Testing | Tool testing, or [[:Category:Metal Shop#Tool Testing
Night|come to the shop on Tool Testing Night]] |
| Restrictions | green |
Description
Located in a room on the southern wall of the Metal Shop, between the sand-blasting room and the CNC plasma cutter. An 8' x 8' spray booth with an unvented filter blower. This facility is sized to accommodate bicycle frames. A rolling rack fits into a 4'x4'x8' box oven. Two guns are available, and many jars of colored paints are present in the shop.
The process uses dry powdered paint that is applied with a pneumatic gun that includes a high-voltage electrode. As the powder passes by the electrode it becomes electrically charged. The metallic workpiece is grounded and so it attracts the charged paint particles. After coating, workpieces are baked in a convection oven to fuse the paint.
Pages in category "Powder Coating Facility"
The following 4 pages are in this category, out of 4 total.
