Category:Electronics and Robotics Shop

Electronics and Robotics
View of E&R shop
Electronics and Robotics
Building	{{{building}}}
Lead	Andrew Anselmo, Mike Beach
User email list	members@artisansasylum.com
Tool Testers	Sign up here
Hours	Same as membership hours; shop leads are available during Circuit Hacking Nights, Wednesdays 6-8 pm.

Electronics and Robotics (generally known as E&R) is an ~800 square foot shop where electronics and robotics projects can be worked upon.

Training and testing

Training and testing is REQUIRED before using this shop, especially with regard to soldering irons and oscilloscopes. If you're not sure if your experience is adequate, please contact the shop lead. Sign up here for tool training and testing. We can also test on Wednesday night Circuit Hacking Nights, from 6 pm to 8 pm.

Availability

This shop is available to members 24/7. We have 14 benches, however not all benches have all equipment. If there is a class running, please be cognizant of your own noise levels to try not to interfere with instruction.

Rules

• Please do not enter the 'Cabinet of Why We Can't Have Nice Things' without permission. This contains parts and consumables for fixing equipment such as oscilloscopes and multimeters.
• E&R is one of the few shops that has parts available for member projects. Please do not take all of a particular part; if you see the supply of something running low, let us know.
• Tools should not leave the shop without notifying the shop leads. This includes soldering irons, oscilloscopes, wire strippers, flush cutters, and hand tools.
• If you don't know where something goes, do not put it 'anywhere'; place it on the top of the rear cubby area. Our inventory of parts and equipment is useful only if things are in the correct places.

Usage tips

• Use containers or cardboard boxes to transport projects, and label that container or box.
• We have a parts index so you can easily find parts and equipment. See: https://wiki.artisansasylum.com/images/1/1f/ENR_Inventory.pdf It is a PDF on each computer in the shop, and on Printmonster, the printing station.
• Remember to shut off equipment (soldering irons, exhaust fans, oscilloscopes, power supplies) and return cables to their proper racks after usage.

Etiquette

Please follow this shop etiquette so that we don't have to make more rules. As the mighty and awesome Rob Masek noted:

"Rule Zero: Don't do anything that makes us have to create another rule."

• Fill out in-progress project tags completely -- with your name, contact information, and space number. A name isn't always enough information for someone to track you down if your project seems abandoned.

Layout

The shop has multiple benches and storage areas. The following will show the identification of the areas, which are needed in finding things from the inventory list.

Flammables

Flammables for E&R are stored in the yellow cabinet on the edge of the shop:

PrintMonster

Printmonster is the printing station, and is located at the front of E&R. See https://wiki.artisansasylum.com/wiki/PrintMonster for details.

Bench Alpha

This bench contains an Ubuntu PC and Arduino sensor parts.

Bench Bravo - Raspberry Pi

This bench contains a Raspberry Pi station, to connect to Raspberry Pi 2 through 5, and Pi Zero systems. Please do not remove connection cables from E&R.

Bench Charlie

Bench Delta

Bench Echo

Bench Foxtrot

Bench Golf

Bench Hotel

Bench Indigo

Bench Juliet

Bench Kilo

Bench Lima

Bench Mike

Bench November

This bench contains elements for the Boston Amateur Radio Club. https://www.barc.org/

Storage Areas

These storage areas are carefully curated and inventoried. If you don't know where something should go, put it on the back shelf with a tag, and we will store it correctly.

Tall Shelves Alpha, Bravo, and Charlie

The tall shelves are shown below. Shelf Alpha is on the right, Shelf Bravo is in the middle, and Shelf Charlie is on the left. Do NOT climb the shelves, or stand on chairs to reach parts above.

Toolbox

The toolbox is located between the tall shelves and Bench Bravo.

XYZ Table

The XYZ table runs from the computer on the other side, on the rolling cart.

Rolling Cart

The rolling cart contains a Windows 10 computer hooked up to the overhead projector. The projector acts as a second screen, or can be configured to mirror the PC screen.

Overhead Projector

The overhead projector is on top of Bench Golf. Do not forget to turn it off after use.

Back Wall and Cubbies

Bookshelf

Wire storage

We have three wire storage racks

Front Wire Shelving Rack, Demos, and Donations

Donations to Electronics and Robotics in cash can be placed here.

Rear Parts Area

The rear parts area has old Radio Shack shelves (1-4) on the floor, and a few layers of shelves above. Shelves 1, 2, and 3 have columns (A is on the left, and B, C, D etc. go to the right...)

Baker's racks are on the other side.

Help us improve

E-mail the shop lead with your concerns, comments, questions, and suggestions for improvement. Let us know if the shop was left not ready-to-use, equipment is malfunctioning, a consumable is running low, if you want to help drive an improvement project, or if you can think of anything else that will make the shop a better resource for you!