Do-All Vertical Bandsaw
From Artisans Asylum Wiki
Link to: Machine Shop Main Page
 |
 |
Eye protection required! |
|---|---|---|
| Do-All Vertical Band Saw | |
|---|---|
| General Info | |
| Make | Do-All |
| Model | 2013-10 |
| Serial | |
| Specs | |
| Manual | Instruction Manual for a Similar Model |
| Asylum Info | |
| Location | Machine Shop |
| Rubric | N/A |
| Training | |
| Testing | Tool testing |
| Restrictions | red |
See the Vertical Band Saws category for notes on using saws of this kind.
Safety
Link to: Safety notes on the Metal-Cutting Vertical Band Saws category page
| |
|---|---|
| The Do-All is extravagantly decorated with reminders like this. |
Operation
This machine is largely self-documenting.
Speed Selection
The machine is usually set to cut mild steel, for other materials it may be necessary to change the blade speed.
- The first step is to find what speed is needed.
| |
|---|---|
| Blade sizes and speed settings are found with this tool bequeathed to us by our ancestors. |
Blade speed data are well-documented and may be found from a wide variety of sources. The Do-All has a mechanism on its side panel that is well worth examining. It shows how your great-grandparents did these things. Today devices like this are as rare as they are baffling.
- Next the user checks the current blade speed. An indicator on the lower left side of the machine reads in feet per minute.
This indicator only registers while the machine is running.
| |
|---|---|
| Feet per minute. Note only the SLOW speed range is available. |
