Sharp Manual Milling Machine
Link to: Machine Shop Main Page
 |
 |
Eye protection required! |
|---|---|---|
| Sharp Milling Machines | |
|---|---|
| General Info | |
| Make | Sharp |
| Model | |
| Serial | Click 50722767, Clack 33123368 |
| Specs | |
| Manual | Operating Manual |
| Asylum Info | |
| Location | Machine Shop |
| Rubric | N/A |
| Training | Tool classes |
| Testing | Tool testing |
| Restrictions | red |
See the Milling Machines category for notes on using all 3-Axis Milling Machines
Safety
Link to: Safety notes on the Milling Machine Category page
Description
There are two Sharp LMV manual units in service in the Machine Shop:
"Click" has two motor drives on the two table movement axes. It has a manual drawbar for changing tools. It is located next to the garage-door exit to the loading dock.
"Clack" has non-functioning servo motors on the two horizontal axes, with cranks for manual control. This machine has an air-actuated drawbar in the spindle for tool changing. It is located to the right of the Accupath CNC machine. For a demonstration of how to use the pneumatic power drawbar, please watch this brief video: https://youtu.be/fZVNUPEhiw4?si=xtPTGpP5ewh48i9b
| |
|---|---|
| The pneumatic drive on this Sharp mill gives "Clack" it's name. |
| |
|---|---|
| Manually changing the tool on Sharp mill "Click." |
