Category:Digifab Shop
From Artisans Asylum Wiki
| Digifab | |
|---|---|
| Digifab | |
| Building | Holton |
| Lead | Nick Anastasia |
| User email list | digifabshop-users@artisansasylum.com |
| Tool Testers | |
| Hours | Same as membership hours |
The Digital Fabrication houses a variety of 3d printers, laser cutters, and a vinyl cutter.
All Tools in the shop should be reserved for use in Nexudus. If you cannot see the tool in the booking list then you have not been tool tested. Check below for each tool for tool testing.
See the subcategories below for a list of all our tools.
FDM Printers
| Tool | Class | Tool Tester(s) |
|---|---|---|
| BambuLabs P1P | RED | Sign up here |
| Ender 3S1 (2 units) | RED | Sign up here |
| anyCubic Kobra | RED | Sign up here |
| Prusa MK3 (2 units) | RED | Sign up here |
| Markforged Mark 2 | RED | email: digifabshop@artisansasylum.com |
| Creality Ender 6 | RED | (out of service) |
| Creality Ender 5 Plus | RED | (out of service) |
Resin Printers
| Tool | Class | Tool Tester(s) |
|---|---|---|
| Epax E10 | RED | Sign up here |
Laser Cutters
| Tool | Class | Tool Tester(s) |
|---|---|---|
| BlackCat Laser Cutter | RED | Sign up here |
Vinyl Cutters
| Tool | Class | Tool Tester(s) |
|---|---|---|
| Vinyl cutter | GREEN | No Tool Testing Required |
Pages in category "Digifab Shop"
The following 9 pages are in this category, out of 9 total.
