3DFabLight
From Artisans Asylum Wiki
Link to: Metal Shop main page
Link to: Metal Shop tool list
| 3D FabLight 3000 Watt metal cutting LASER | |
|---|---|
 | |
| General Info | |
| Make | 3D FabLight |
| Model | 3,000 Watt |
| Serial | {{{serial}}} |
| Specs | {{{manufacturer_specs}}} |
| Manual | {{{manual}}} |
| Asylum Info | |
| Location | Metal Shop |
| Rubric | {{{rubric}}} |
| Training | {{{training}}} |
| Testing | {{{testing}}} |
| Restrictions | red |
{{{tool_categories}}}
Description
VERY PRELIMINARY WIKI ENTRY.
THIS TOOL IS NOT READY FOR USE AT THIS TIME.
This tool uses a LASER to cut sheets of metal
Use for:
- Up to 16 ga (0.0625") sheet metal, any metal is okay
- Note that different metals have different thickness limits.
Do Not Use for:
- Any sheet metal exceeding max thickness
Hazard Analysis
- Materials can catch on fire while being cut.
- Cuts/ scrapes from sharp cut edges of work
Operation Notes
- ... TBD
Basic Operation Instructions
1.
