Millport SmartLathez 1740 CNC Lathe: Difference between revisions

From Artisans Asylum Wiki
No edit summary
No edit summary
 
(12 intermediate revisions by 2 users not shown)
Line 1: Line 1:
[[Category:Category:Lathes_--_Metal]]
[[Category:Lathes_--_Metal]] [[Category:Tools]]
{{ToolBox|tool_title=Millport SmartLathez 1740 CNC Lathe|image=Millport SmartLathez 1740.jpg|caption=Millport SmartLathez 1740|make=Millport|model=SmartLathez 1740|serial=622005|location=Machine Shop|training=[https://www.artisansasylum.com/class-catalog Tool classes]|testing=[https://www.artisansasylum.com/tool-testing Tool testing]|restrictions=red|tool_categories=[[Category:Lathes -- Metal]]|manufacturer_specs=[[Media:SmartLathEZ1740Manual.pdf|SmartLathEZ1740Manual]]|manual=[[Media:822LatheManual.pdf|822LatheManual]]|rubric=[[Media:CNClatheExercise.pdf | HSMworks turning step by step]]}}
 
{{ToolBox
  |tool_title=Millport SmartLathez 1740 CNC Lathe
  |image=Millport SmartLathez 1740.jpg
  |caption=Millport SmartLathez 1740
  |make=Millport
  |model=SmartLathez 1740
  |serial=622005
  |location=Machine Shop
  |training=[https://www.artisansasylum.com/class-catalog Tool classes]|testing=[https://www.artisansasylum.com/tool-testing Tool testing]
  |restrictions=red
  |tool_categories=[[:Category:Lathes_--_Metal | Click here for an overview on the metal-cutting lathes at AA]]
  |manufacturer_specs=[[Media:SmartLathEZ1740Manual.pdf|SmartLathEZ1740Manual]]
  |manual=[[Media:822LatheManual.pdf
  |822LatheManual]]
  |rubric=[[Media:CNClatheExercise.pdf | HSMworks turning step by step]]
}}


Link to: [[:Category:Machine Shop | Machine Shop Main Page]]
Link to: [[:Category:Machine Shop | Machine Shop Main Page]]


== Safety Information ==
{{EyeWarning}}
{{EyeWarning}}


== Manuals ==
{{Warning | text= CNC machines are automatically controlled and may start at any time. }}


[[Media:SmartLathEZ1740Manual.pdf|SmartLathEZ1740Manual]]
Link to:  [https://wiki.artisansasylum.com/wiki/Category:Lathes_--_Metal#Safety Safety notes on the Metal-cutting lathes category page]


[[Media:822LatheManual.pdf|822LatheManual]]
== Materials Information ==


[[Media:CNClatheExercise.pdf|HSMworks turning step by step]] . You will need a STEP file to work with this manual.
== Operating Instructions ==


==CNC Lathe Notes==
=== Manuals ===
Centroid controller
[[HSMworks use for CNC Lathe]]


G-code with some extra M-codes
[[Media:SmartLathEZ1740Manual.pdf|SmartLathEZ1740Manual]]


lathe motor is 10-HP, but, with VFD speed control %age of top speed corresponds to roughly the mount of HP availabe.
[[Media:822LatheManual.pdf|822LatheManual]]


Uses Tri-Cool for coolant
[[Media:CNClatheExercise.pdf|HSMworks turning step by step]] . You will need a STEP file to work with this manual.
 
Chk oil level on back, way oil
 
Turn on
 
Set home: Green button at lower right of controller will cause it to run through its homing procedure.
 
The tailstock will trip the furthest Z-limit switch, so move tailstock towards chuck. If it is not appearing to move switch from ‘Inc’ to ‘Cont.
 
MPG: Mean Pulse Generator
 
Part Design Considerations:
 
*Inside corners should have radii greater than that of the tool insert tip.
*Outside corners should be set to 0.005-0.010” radii to avoid burrs.
*Stock to leave for finish passes: 0.015” axial & 0.030” radial
*Can cut 0.1” off of radius with Aluminum
 
Define tools in HSMWorks<nowiki><br></nowiki>Define Tool Positions & Angles<nowiki><br></nowiki>Define Tool Feeds & Speeds
 
Parting in hard alloys should be 300SFM for carbide cutters
 
Parting defaults to 0.040”/rev., which leads to DESTRUCTION! Better to set at 0.0035”/rev.
 
Make sure that your tools have different numbers in the tool library for a single job
 
Inserts with a negative rake are mounted at an angle on the toolholder, so cannot cut away from the chuck as the rake is actually negative in that direction.
 
Set max spindle speed when changing gears and ranges. This is a global var?
 
Post-processing: Use FANUC
 
G53:  Retract<nowiki><br></nowiki>G54:  Work Offset
 
Keep in mind that G53 & G54 go to coords (0,0) which will be the face of the stock.
 
Tool changes are done explicitly by:
 
* Rapid Traverse  -  G53, G54, etc.
* Tool Offset
** Home machine
** Set 0s on stock
** The set tool offsets
 
In graph mode we can get range to see only those moves due to those lines of code.
 
VS-Codes is good for editing G=code. Use G-code add-in
 
Use locknut on toolholder to avoid changing height when handling toolholder.
 
F1/Set-up
 
F2/Tools
 
Offset Library
 
Tool: may set to 0, or set offset to a Var
 
MPG: Can turn off to avoid changing values if you accidentally bump into the hand wheels during operation
 
F2/Measure
 
Sets the offset
 
Set Z-Ref: 2” when using indicator
 
Move manually to where you expect (0,0) to be and look at the numbers on the screen as a check.
 
Run Menu
 
Set part count to 1
 
Re-set spindle speed and coolant back to Auto CTRL
 
For the big chuck, the max speed is 700RPM
 
For the Medium chuck, the max speed is 900RPM


For the collet closer, the max speed is 2-2,400RPM
== Maintenance ==

Latest revision as of 13:30, 14 October 2024



Millport SmartLathez 1740 CNC Lathe
Millport SmartLathez 1740
General Info
Make Millport
Model SmartLathez 1740
Serial 622005
Specs SmartLathEZ1740Manual
Manual [[Media:822LatheManual.pdf 822LatheManual]]
Asylum Info
Location Machine Shop
Rubric HSMworks turning step by step
Training Tool classes
Testing Tool testing
Restrictions red

Click here for an overview on the metal-cutting lathes at AA


Link to: Machine Shop Main Page

Safety Information

Warning Safety glasses Eye protection required!


Warning CNC machines are automatically controlled and may start at any time.


Link to: Safety notes on the Metal-cutting lathes category page

Materials Information

Operating Instructions

Manuals

HSMworks use for CNC Lathe

SmartLathEZ1740Manual

822LatheManual

HSMworks turning step by step . You will need a STEP file to work with this manual.

Maintenance

Retrieved from "http://wiki.artisansasylum.com/index.php?title=Millport_SmartLathez_1740_CNC_Lathe&oldid=5348"